Question about 2003 Toyota Corolla
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Take out the small screws that hold your turn signal/marker lights on. This will allow you to reach in and undo the three (if I remember right) 10mm nuts on the back of the fog housings that hold them in the bumper. Once they're removed, press on the back of the fog housing and the foglight assembly will pop out of the bumper. Then you can replace the bulbs.
What I did on my Z is something you might consider - while I had them out, I took them apart (just a couple screws and bolts, very easy). Open it up so that you have access to the glare guard - the cup that sits in front of the bulb. This blocks forward projection of the light, and instead bounces it onto the reflector to be spread very wide (but not far forward) in a fog beam pattern. I used pliers to physically break the guard off the housing, so that instead of a wide, shallow fog pattern, I had a forward-projecting driving beam. I also swapped the 35w OEM bulbs for 55w higher-output superwhite bulbs (this increase in power consumption is not enough to cause any risk to the wiring or fusing, by the way - it worked for years for me). Then put them back together and reinstall them - you'll find a drastically improved light pattern for night driving, and they're still low enough to the road to cut under most fog. Especially since I always felt that the Z headlights were pretty pathetic for output (at least until I installed HID lighting), this was a great mod to make to the car.
Posted on Sep 04, 2008
Is there power to the bre light switch, a 12 volt test light works gret for this test, they are cgeap and avail at any parts store. If the switch has power in and out when the brake pedal is pressed then the turn signal/multifunction switch is most likely the problem.
Posted on Nov 12, 2008
SOURCE: 2003 sunfire wiring
I have a 2003 subnfire and my battery drain every night.
found out that my radio the monsoon 8 speaker system with the amp was the cause it even cause Dash lights to work and not to work. pulled stereo and amp no problem now. solved problem
Posted on Feb 11, 2009
Tips for a great answer:
Dec 06, 2010 | 2003 Toyota Corolla
Nov 28, 2010 | 2003 Toyota Corolla
May 20, 2010 | 2003 Ford Focus
Feb 11, 2010 | 2003 Jeep Wrangler
Dec 21, 2009 | 2003 Toyota Corolla
Oct 19, 2009 | 2003 Subaru Outback
Jan 07, 2009 | 2000 Toyota Corolla
Mar 18, 2015 | 2003 Toyota Corolla
246 people viewed this question
Usually answered in minutes!