Question about 2000 Dodge Ram 3500

1 Answer

1997 dodge ram 3500 with manual transmission. truck wont start with clutch engaged

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Dodge Master
  • 680 Answers

Under the dash where the clutch pedal exits the cabin at the clutch master cylinder, you will see a two pronged plug. Unplug it and run a a small piece of wire from one side of the plug to the other.
CAUTION: THE VEHICLE WILL NOW START WITHOUT ENGAGING THE CLUTCH PEDAL AND WHILE IN GEAR!
I hope I've answered your question. If so please rate my assistance and leave a testimonial.

Posted on Dec 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I get a wiring diagram for a 1997 Dodge RAM 3500 diesel pickup?


1997 3500 Wiring Diagram - Dodge Diesel - Diesel Truck Resource Forums

www.dieseltruckresource.com/...dodge-ram.../1997-3500-wiring-diagra...
Jan 24, 2011 - Hey guys, I'm working on a 97 3500 that's had the bed removed and replaced with a flatbed. There is the biggest mess under that truck wiring wise and. ... 2007 Ram 3500 A/C compressor wont engage, need wiring diagram ...

Dodge Wiring Diagrams / Schematics - YouTube

? 1:13
https://www.youtube.com/watch?v=UI6_vhCHFYU
Nov 19, 2013 - Uploaded by Robert Nauert
Dodge Wiring Diagrams / Schematics ... Nitro, Power Wagon, Ram 1500, Ram 2500, Ram 3500, Ram 4500 ...

1997 Dodge Cummins - Full color wiring diagrams - 12 Valve ...

forum.mopar1973man.com/.../1638-1997-dodge-cummins-full-color-wi...

Jan 01, 2016 | Dodge Cars & Trucks

1 Answer

Dodge code p1740


Is it auto or manual?? If it's manual I would say your clutch has thrown in the towel, if it's auto if could be transmission oil dirty and will need replacing, hope this helps

Aug 30, 2014 | 2000 Dodge Ram 3500

1 Answer

2008 3500 55890 miles a/c just blows hot


you may have a high pressure problem or a high pressure switch defective also make sure you have good air flow clean condeser

May 30, 2010 | 2008 Dodge Ram 3500

1 Answer

Starter will not start in forward manual gears,


Neutral safety switch. Its purpose is to allow starter to engage in Neutral ONLY

Apr 05, 2010 | 2006 Dodge Ram 1500

3 Answers

Nissan sentra 1997 starts but wont go when put in gear


is it a manual or automatic?if it's manual check clutch.if it is automatic check transmission fluid.

Dec 02, 2008 | 1997 Nissan Sentra

1 Answer

Transmission problems


If you have not had your transmission serviced in the last 30K I would start with that. when the filters start to get restricted it can cause this problem. Be certain who ever does the job is familiar with chrysler transmission as they require atf+ 4 fluid and the clutch bands need to be adjusted to the right spec. It is also possible that the vehicle speed senser is bad this would most likely affect your speedometer as well. there is also the chance that there is an electrical problem bad switch or short in the wiring this is unlikely

Nov 28, 2008 | 1997 Dodge Ram 3500 Club Cab

1 Answer

Error codes


Her is the definition and a list of possiable causes.


Code P1740-Torque converter clutch did not lock up when the PCM sent the command. Enabling conditions: No engine or transmissions codes are present, vehicle speed was under 70 MPH, TPS was under 33% open. When the PCM commanded the torque converter to lock, no change was detected in engine speed. Blocking action: This code can block the following monitors: none.
Testing: Check torque converter solenoid for proper operation.
P1740 TCC O/D SOL PERFORMANCE (GAS)
Theory of Operation
The Torque Converter Clutch (TCC) Solenoid is used to engage the TCC which improves fuel economy.
When Monitored
The Torque Convertor Clutch (TCC) and Overdrive Clutch (OD) will be tested each time the PCM requests TCC engagement in 3rd gear and OD.
Set Condition
The DTC will set if the expected RPM drop is not achieved while attempting to engage TCC or OD. This indicates a malfunctioning torque convertor or overdrive clutch.
Possible Causes
* ENGINE DTCS PRESENT
* TRANSMISSION DTCS PRESENT
* TRANSMISSION TEMPERATURE TOO COLD
* OIL PAN CONTAINS EXCESSIVE DEBRIS
* 3-4 SHIFT SOLENOID
* SHAFT OR SEAL DAMAGE
* TCC SOLENOID
* TORQUE CONVERTER

Sep 25, 2008 | 2005 Dodge Ram 3500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

239 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...