Question about 1996 Ford Explorer

Open Question

Torque specs on intake manifold and plenum on a 96 ford explorer with a 4.0l

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
chuck943
  • 783 Answers

SOURCE: Ford 460 Intake Manifold Torque spec

22 to 35 ft lbs

Posted on May 22, 2009

Ad
  • 25 Answers

SOURCE: 87 samurai bolt torque specs for engine

The haynes book is not recommended since there are numerous mistakes and they still will not update. One of the biggest is the firing order.

The factory service manual is the only way to go.

Head bolts - 46 - 50.5 lbs (there is an order sequence for the bolts)

Intake & exhuast manifolds- 13.5 - 20 lbs

Flywheel - 41.5 - 47 lbs

Clutch cover - 13.5 - 20 lbs

Posted on Mar 17, 2009

  • 750 Answers

SOURCE: torque setting for intake manifold, head bolt and

what engine do you have? the 4.0l push rod engine = in/manifold 15-18ft-lb, cyl.head bolts=stp1:44ft-lb stp2: 59ft-lb,stp3: + 90 degrees, ex/manifold = 15-18 ft-lb. the 4.0l sohc.engine = in/manifold107-123 in-lb,cyl.head bolt 8mm=23-25ft-lb,12mm=26 ft-lb+90 degrees+90 degrees,ex/manifold= 15-18 ft-lb. and the 5.0l =in/manifold=24ft-lb,cyl.head=stp1:30ft-lb stp2: 50ftlb,stp3: +90 degrees, ex/manifold=30 ft-lb

Posted on Oct 09, 2009

Testimonial: "thank you very much.and yes it is 4.0 sohc. thank you."

  • 1244 Answers

SOURCE: Need torque sequence and torque specs for intake

bottom intake bolts torque 15-18 ft lbs from center and in criss cross pattern top plenum bolts 12-14 ft lbs

Posted on Jan 22, 2010

arauzvictor1
  • 466 Answers

SOURCE: need head bolt, intake manifold, and exhaust torque specs

Cylinder Head Bolt Step1- (25 FT.Lbs) Step2(45 Ft.Lbs) Step3(65Ft,Lbs).....Intake Manifold(35Ft Lbs)....Exhaust Manifold Center (20Ft Lbs) All Others (20 Ftlbs).....Thanks

Posted on Mar 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you tell me the torque specs and sequence for a 2004 Ford Explorer 4.0 engine intake manifold cover?


First response should do the trick,check HERE:(LINK) https://www.google.com/search?client=aff-maxthon-maxthon4&channel=t27&q=torque%20specs%20and%20sequence%20for%20a%202004%20Ford%20Explorer%204.0%20engine%20intake%20manifold%20cover

May 09, 2017 | Ford Cars & Trucks

1 Answer

03 Dodge Intrepid intake manifold torque specs top & bottom is for 3.5 V6


Lower Intake:
  1. Use a skin coat of RTV silicone on both sides of the water passage ports (outer most holes) and put the new lower intake gaskets into place
  2. Hand tighten the 13mm head intake bolts and Torque the bolts , starting from the center and working your way out in a circular pattern
  3. Torque these bolts in a few small increments until they have reached 250 inch pounds of torque.
  4. Upper Intake Plenum:
  5. When installing the intake air plenum , be sure to catch the four center bolts and the two side bolts (stiffener brackets) before tightening , The center bolts should be torqued to 250 inch pounds .The fuel rail bolts should be torqued to 100 inch pounds

Jun 24, 2016 | 2003 Dodge Intrepid

1 Answer

98 ford windstar intake manifold torque specs


Intake torque specs ' FordForumsOnline.com

www.fordforumsonline.com > Ford Tech Forums > Engine & Drivetrain

May 7, 2010 - 2 posts - ‎2 authors
ISO torque specs for the intake & plenum for a 98 Windstar...3.8 with the ... Our community is here to help you with any questions you have related to your Ford. ... Lower Intake Manifold to Cylinder Head Bolt 8-12 - (71-106).

Torque Specifications - AutoZone

www.autozone.com/.../Ford-Windstar.../Specifications/Torque-...

AutoZoneAutoZone Repair Guide for your 2004 Ford Truck Ranger 2WD 2.3L MFI DOHC 4cyl Engine Mechanical Specifications Torque Specifications. ... Ford Windstar 1999-2003 ... Bolts, Main Bearing Bolts, Rod Brearing Bolts, Crankshaft Damper Bolts, Flywheel Bolts, Manifold. Intake, Exhaust ... Vehicle: 2008 Ford F150, 98 Civic.

Dec 21, 2015 | 1998 Ford Windstar

1 Answer

Torque specs on intake plenum and fuel rail on a 98 ford Ranger with a 4.0l




Hi the torque spec for this fuel rail/manifold is 9-11lb/ft. Here is pic of the sequence.

2011-03-28_205720_fuel.jpg



Jan 10, 2012 | 1998 Ford Ranger SuperCab

2 Answers

Ford 4.2 intake manifold torque specs & sequence


Torque specs for a 2003 f 150 4.2 L.
first pass 53 lb-in, second pass 89 lb-in
lower plenum
10_14_2012_6_30_49_pm.gif

upper plenum
10_14_2012_6_31_22_pm.gif

Dec 12, 2010 | 1997 Ford Econoline

1 Answer

I need the torque specs for the intake manifold bolts on a 2001 mustang gt.


Intake manifold-to-cylinder head bolts for 5.0L V8:
Step 1 = 96 in-lbs Step 2 = 16  " Step 3 = 23 to 25  "
Numbers taken from an after market manual, so use at your own risk.

Apr 15, 2009 | 2001 Ford Mustang

1 Answer

Need to the torque specs for a 1999 Dodge Durango


Head Torque sequence Step 1: torque to 50 Ft/Lbs Step 2: torque to 105 Ft/Lbs recheck final torque in sequence.

Torque intake manifold: Step 1: 12 inch/Lbs, (hand tight) Step 2: 72 inch/Lbs, (6) Ft/Lbs Step 3: 12 Ft/Lbs
torque intake plenum: Step 1: 24 inch/lb (hand tight) Step 2: 48 inch/lb (4) Ft/Lbs Step 3: 84 inch/lb (7) Ft/Lbs (To torque bolts, start in center using crisscross pattern)

Apr 07, 2009 | 1999 Dodge Durango

Not finding what you are looking for?
1996 Ford Explorer Logo

Related Topics:

909 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

fordexpert

Level 3 Expert

5575 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...