Question about 1999 Jeep Cherokee

1 Answer

1999 jeep cherokee sport 6cyl starting problems - replace crank sensor & power control module - still have trouble.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Based on what you have replaced I would check the fuel filter and if possible check the fuel pressure at the rail.

Posted on Dec 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix 1999 jeep cherokee sport


You mean it cranks but does not start, right ?
The NoBus on the display means the cluster is not talking to the computer. That could be a wiring problem or a component problem.
Have you checked the engine computer for trouble codes ?

Jul 27, 2014 | Jeep Cherokee Cars & Trucks

1 Answer

Tracing an electrical issue with my 1999 Jeep Cherokee sport. when ignition is turned on after a few seconds my odometer says, " no bus" what does this mean ?


The instrument cluster or ignition switch module,
lost communication with the electrical bus or wiring
system & can not be seen by other modules!

Need wiring diagrams & factory trouble charts to diagnose
the fault

May be something on the internet about it ,on your vehicle

Google the issue

Jul 21, 2014 | 1999 Jeep Cherokee 4WD

1 Answer

Where is the flasher module located on my 1999 jeep cherokee sport?


For 1999 Jeep Cherokee 4WD 4.0L MFI 6cyl the Flasher is located: Seating area, driver side, located in a wire harnessconnector which is secured to the diagnostics spliceblock bracket outboard of the steering columnopening underneath the instrument panel.

Hope this helps; good luck (reemmber to rate this answer).

May 09, 2011 | 1999 Jeep Cherokee

1 Answer

Where is the flasher module located on my 1999 Jeep Cherokee sport?


For 1999 Jeep Cherokee 4WD 4.0L MFI 6cyl the Flasher is located: Seating area, driver side, located in a wire harnessconnector which is secured to the diagnostics spliceblock bracket outboard of the steering columnopening underneath the instrument panel.

Hope this helps; good luck (reemmber to rate this answer).

May 09, 2011 | 1999 Jeep Cherokee

2 Answers

Reversed jumper cables on 1999 jeep Cherokee sport. Battery seems to be ok, but no gauges and no start. Will crank, and electric fan comes on with key in on position.


The main control module is the most sensitive, but you should go through the motions of checking if there is spark, if there is fuel pressure, etc. The control module is expensive. But you can try a salvage yard one.

Feb 22, 2010 | 1999 Jeep Cherokee 4WD

1 Answer

99 Jeep Cherokee Sport, 4.0L -won't start


you need to have it connected to an OBD2 machine and watch if you are missing the cam sensor showing RPMs
or if your missing crank sensors RPMs,
it could be a wiring problem or computer if your seeing the RPMs from both sensors,and the last thing i would check is hooking up a fuel gauge to the reed valve and watch what fuel pressure you have while cranking,if the cam sensor is the culprit it will turn the fuel off after the cranking.

Jan 11, 2010 | 1999 Jeep Cherokee

1 Answer

1999 jeep cherokee sport it wont start cranks but wont fire


Figures...I'd use 2&3 as b&c Open reading means that with the meter set to ohms and turned on, the meter should read the same connected to the terminals as it did before you connected it.

Oct 29, 2009 | 1999 Jeep Cherokee

1 Answer

I have a 99 jeep cherokee sport will not start


Seems to be a chronic problem with crank position sensors... On yours it is tested between b&c terminals and should have no continuity there. (should show an open circuit if good)

Jun 05, 2009 | 1999 Jeep Cherokee

1 Answer

2001 Jeep Grand Cherokee 4.7L crank no start


easy trouble shoot easy fix ! check to see if its getting fire if not replace the crank sensor it will fire right up common problem with the jeeps . Hope this helps you out !!!

Jun 02, 2009 | 1999 Jeep Grand Cherokee

1 Answer

1999 Jeep Sport will not start


It could be your Crank Shaft Sensor. That's what it was on my 99 Cherokee Sport the first time that happened.

Apr 20, 2009 | 1999 Jeep Cherokee

Not finding what you are looking for?
1999 Jeep Cherokee Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...