At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
www.saturn.com/.../saturn/.../2007/aura/2007-saturn-aur...
Saturn Corporation2007 Saturn AURA Owner Manual M. 1 ... trademarks, and the name AURA is a trademark ... Warning Lights, Gages, and Indicators in ..... Get it up to speed.
2carpros has this to say about Po442
A code P0442 most likely means one or more of the following has happened:
•A loose or improperly affixed gas cap •A non-conforming gas cap (i.e. not factory/original brand) •A small leak/hole in a fuel vapor hose/tube •Other small leak in EVAP system •Faulty vent o-ring seal
Possible Solutions With a P0442, the most common repair is to:
•Remove and reinstall the gas cap, clear the codes, and drive for a day and see if the codes come back. •Otherwise, replace the gas cap, or •Inspect the EVAP system for cuts/holes in tubes/hoses
To replace just the fascia (soft painted part) around $500. If there is more damage, the cost will go up quickly. You may get lucky and find one the right color at an auto recycler (junk yard) for around $150 plus installation.
The proper replacment proceedures for saturn aura brake pads front is to take off your wheels, unbolt the caliper housing on it. You should also replace the shims when you replace the brake pads, it's the metal brackets around the pads. The new brake pads slide into place. If i was you I would also replace the caliper pin boots with new ones aftermarket. My car had a warping issue and a uneven brake pad wear and this fixed both problems. Need anything else ask, the tire should be retorqued to 100ft/lbs when you reassemble everything.
The trick is to remove the cap on the brake fluid reservoir on the firewall under the hood before squeezing the caliper. Be sure to replace the cap before attempting to press the brake pedal.
×