Question about 1989 Nissan Pulsar

1 Answer

Ignition barrel when key is inserted it wont turn just seems like it is siezed up but there is alittle bit of turn but it wont engage the reds and the release button seems stuck aswell any help would be greatly appreciated

Posted by on

1 Answer

Tried turning the wheel a little to disengage the lock function?

Posted on Sep 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A car with a lock turn on and mi car wont turn on it a pontiac g6 how can i fix it?


do you mean the ignition lock is engaged and won't unlock when the key is inserted ? is the key very worn ? if so get a new one cut or use the spare if you have one , other wise you will have to strip out the steering wheel cowling and either manually try to get the lock undone , with a lot of wiggling , gently with the key and the wheel at the same time or may have to have a new ignition barrel

Sep 29, 2014 | Cars & Trucks

1 Answer

Key comes out but won't turn the car off


the ignition barrel/key are so worn they are'nt engaging properly when turning off put a slight downwards pressure as turning key this may engage the key and barrel but sounds like need a new key if thats worn smooth or a new barrel if key is sharp

Apr 22, 2014 | 2000 Isuzu Rodeo

1 Answer

1993 bmw 318i - ignition lock cylinder removeal


turn key to 1st position insert a 1.2 mm rod (blunt end of a drill bit) down the hole at the side of the lock barrel puch detent in and pull barrel out with key!

May 02, 2010 | 1993 BMW 3 Series

1 Answer

How do you take the old ignition barrel off 1996 bmw 316i ?? please help


on the edge of the ignition barrel there is a little hole, you must turn the ignition to the first click and insert i 1.2 mm rod (drill bit)about an inch down into the lock and puch back the ident then pull the key and barrel out together.

Oct 01, 2009 | 1996 BMW 318

1 Answer

Key wont turn in ignition barrel on my bmw 316 compact (N REG)


had this problem myself recently and i had to remove steering wheel and side covers remove shear bolts from lock housing using a smal chisel that lets you lake of lock housing and steering lock to replace them your local bm dealer should be able to order the correct one to fit your key, your car will still run with key out but you have to insert it to start it.

Sep 26, 2009 | 1996 BMW 318

1 Answer

BMW 530 ignition problem


when starting the car the starter motor uses a huge amount of current

normal things like lights radio ac dont use that much

most of the time the radio will work but the car will not start

i recomend recharging the battery before you start replacing anything

i amagine that changing the barrel would not be that hard
the hardest bit would be finding a barrel and keys


Jul 04, 2009 | 1990 BMW 5 Series

1 Answer

Want to remove the ignition lock cylinder since a broken key is stuck inside.


get a phillipshead un do about 4 screws from underneath plastic cover which hides steering colume. remove cover you will see white plug on the left hand side of ignition barrel disconect.then right hand side there will be acable disconect.now get a small chissel and anti clockwise tap bolts which have no heads on them that are on top of steering colume when they are alittle bit lose use plyers its easier pull bolts out clamp will then come of and then you can pull whole ignition of. now there is 2 brass pins which hold barrel in ignition up near the key end remove and barrel will come out but it might be easier to take whole ignition to locksmith and get them to do it and get new key for around 30 bucks i did a mates about couple months ago seeya orangepeel.

May 18, 2009 | 1995 Mazda 626

2 Answers

Removal of the ignition Barrek


HAVE YOU TRIED TO USE SOME SILICONE SPRAY ON THE NUT? MAYBE YOU CAN CUT THE NUT OFF WITH A DREMEL AND A VERY SMALL DIAMOND BIT WITHOUT CUTTING THE DASH. HOPE THIS HELPS. LET ME KNOW. GOOD LUCK

May 03, 2009 | 2005 Chevrolet Corvette

1 Answer

A4 steering lock does not engage and car won't turn over


The steering locks don't necessarily engage when the key is removed, I always turn the wheel before exiting to engage it. There are several positions that will allow the pin to lock in but if between these, it may seem that it isn't locked.

Aug 23, 2008 | 1997 Audi A4

1 Answer

I have a R reg mercedes E320, the other day i got in to find that the ignition key will not turn, it doesnt seem to power up the ignition barrel?? ive stripped the barrel and if you insert the key and take...


Most likely there you have a security system VAT (Vehicle Anti-Theft) module. If you try to bypass this the car will not start. Have a mechanic or yourself get to the main wiring harness to the ignition in the steering column under the dash, unplug it and use another ignition with a key in it to learn the security system code first before trying to start it.

Jul 15, 2008 | 2001 Mercedes-Benz C-Class

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...