Question about 2003 Chrysler PT Cruiser

1 Answer

Follow up I don't know or understand what a mount is. Can you offer more insight?

Posted by on

  • sam6801 Aug 07, 2008

    After another dealer checked out my car, it was determined it truly isn't the transmission. The bad news is that it's still having problems, and getting worse. As it's worsening it's becoming apparent that it's related to when the air conditioning is on. It splits and sputters and acts like it's gonna stahl, then it "catches" and jumps forward. It's not giving any indicators on the dash though - so my extended warrenty people say that whatever it is will not be covered because the computer isn't detecting any problems! So it's 103 degrees and I don't use the air...sorry to vent but very frustrated!

×

1 Answer

If it's the engine mount , then it is the point where the engine is connected to the frame ..usually 3 places..usually 2 on one end and one where it connects to the transmission. That;s the way it used to be....a few years ago.

Posted on Aug 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace a rear motor mount on a 2003 outlander Mitsubishi


There is no printed detailed instructions that I am aware of. A car repair manual from your auto parts store may give some insight. Usually, most techs will size up the repair visually and remove necessary components to access the mount. The engine may have to be raised slightly for removal of the mount. Experience in auto repair is the biggest asset in this type of repair

Oct 18, 2015 | Mitsubishi Cars & Trucks

1 Answer

My gauges go wild on my 1996 jeep grand choke, what'd Wrong?


Some gauge panels have a controlling regulator on the back. An auto electrician or the jeep owners club forum may offer some insight.

Oct 09, 2014 | Cars & Trucks

1 Answer

Can the brake and clutch pedals be extended


Larry have you tryed the seat up as far as you can the bench seats in rangers are sometimes difficult to more forward with out two people. The olny other thing i can tell you is to put a block on the cluch pedal the problem it you would likely have to disgin it and mount it your self i don't know of any company that offers this if you look you may find one but makeing the pedal longer isn't going to solve the problem it needs to be closer to your foot. Good luck Larry

Apr 21, 2012 | 1994 Ford Ranger Supercab

1 Answer

I have a 91 ford taurus-3.0 engine. my mounts keep on coming undone due to a combination of problems my mechanic told me I should chain my engine down. How would I go about doing that?


Chaining the engine down is a bandaid and a bad idea unless you have a hot rod with 600 HP, there is a reason the mounts are coming undone (don't understand "mounts keep on coming undone due to a combination of problems" ) fix or replace broken mounts, don't forget the transmission mount, If you fix it right it won't mess up other things later like CV joints

Jul 27, 2011 | Ford Taurus Cars & Trucks

1 Answer

Put in new starter on 1987 pontiac 6000 and all it will do when turn over key is a click


You may need to put a shim between where the starter mounts. GM's are famous as the teeth for the starter don't quite match up with the flywheel and when the gear in the start goes out it might not be far enough awy and will just hit the flywheel and not match up the teeth. If you go to your local auto parts store and ask for it they will know what you are talking about as this is very common. you can go underneath and have someone turn the key to see if it's just hit the flywheel and not matching up but may need to remove the cover to see. When or if you get a shim I think you will understand the concept better. Did my best to explain but not the best and making people understand. Sometimes it takes more then one shim to make it right. I hope this helps and wish I had a picture. good luck.

Apr 14, 2011 | 1989 Pontiac 6000

3 Answers

How many amps does a factory installed alternator have?


depends on the year and what type of vehicle it is you didnt put the year of your vehicle or the type of vehicle it is

Dec 22, 2010 | Dodge Grand Caravan Cars & Trucks

1 Answer

I understand that '86 4Runners were built on a Toyota pickup chassis. What model pickup was that? I'm looking for a trailer hitch, but catalogs don't list the '86 4Runners. They start at '87s. So I...


If what you say is true. The only pickup it could possibly be is the Toyota Pickup. CURT offers the 13086 hitch for the 84-95 light pickups. If there is a lot of rust, this is going to be rather difficult as the bolts mounting the bumper will more than likely need to be cut. I can't find any information confirming fitment, but i'm sure this is your best bet. Custom fabrication would be your only other option.

Dec 10, 2010 | 1986 Toyota 4Runner

1 Answer

Replacing bulbs


well... it turns out the 04 is different.
check out this link. it may offer some insight. I understand the bulbd may be replaced in the switches, however you have to remove the aigbag to access....
http://www.cadillacforums.com/forums/cadillac-seville-cadillac-eldorado-forum/155255-steering-wheel-lights-out-2000-sls.html

Dec 28, 2008 | 2004 Cadillac Deville

1 Answer

95 xr7


Sorry, I don't understand the question.

Oct 11, 2008 | 1995 Mercury Cougar

Not finding what you are looking for?
2003 Chrysler PT Cruiser Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...