Question about 2000 Ford Focus

3 Answers

Ford Focus 2000 Stalling.

Hi. I own a Focus 2000, and have had minimal problems with it. But now it has started stalling or has jumpy idling at stops only. Any ideas? It has new spark plugs.

Posted by on

  • 1 more comment 
  • conklin_dyla Jul 10, 2008

    the car starts to cut out when it gets warm

  • Anonymous Oct 07, 2008

    when i come to a stop i put my clutch down start breaking when nearly to a stop it stalls

  • Anonymous Oct 08, 2008

    check engine light is on my 2000 ford focus with only 50000 miles



×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Check for vacuum leaks back side of the engine by the firewall

Posted on Oct 10, 2008

Ad

Check or have it Checked for vaccum leaks, and quick fix may be turning off the ac while idoling.....

Posted on Jul 08, 2008

Ad

Check wiring in all lights not making contact with body. Such as cracked headlights or repeater allowing water to short circuit system

Posted on Jul 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Takes long to start in the morning


Is the "check engine" light on when the car is running ??

Jan 19, 2014 | 2000 Ford Taurus

1 Answer

2000 Ford Focus SE Sony Limited Edition; stalls while idling


not sure, but if battery was dead and alt was replaced.... the computer may have lost some of its memory and need to be re-flashed

Oct 19, 2009 | 2000 Ford Focus

2 Answers

2000 elentra- stalling at the stop light


First suspicion - TPS (Throttle Position Sensor)

ddf3099.gif

Jun 24, 2009 | 2000 Hyundai Elantra

1 Answer

2000 focus engine surgeing on tickover


Here is what you need to do, a cleaning of the intake throttle blade and the idle speed control air-bypass valve, they get full of gunk over the miles and cause idle issues (stalls) like yours,
Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake

Oct 25, 2008 | 2000 Ford Focus

1 Answer

Rough idleling


hi is it only the heater that affects the idling as even if the load is excessive on the motor the electrical load detecter should kick in and compensate so thats where to start no i have no idea where this is located on this model [its part of the ecu ,s set up and designed to increase the revs when electrical load is added] yates210456

Sep 30, 2008 | 2000 Ford Focus

1 Answer

Idling high and stalling.


2 ideas first a vaccume leak or egr valve sticking

Aug 26, 2008 | 2000 Ford Focus

2 Answers

Stalling at idle


Bought a use 03 last week for very cheep because it was idling rough, read in a forum about focus vacuum leaks and to use small burst of starting fluid to find the leak, spray around engine, if you hear the engine level off and run smooth in a particular spot for a few seconds the leak is in that general area, check the hose in that area, i found a large elbow on my pvc valve line was cracked in half, repaired with copper plumbing elbow fitting and silicone. now runs perfect. be very careful with the starting fluid short burst in well ventilated are.

Jul 21, 2008 | 2000 Ford Focus

Not finding what you are looking for?
2000 Ford Focus Logo

Related Topics:

619 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

fordexpert

Level 3 Expert

5613 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...