Question about 2003 Chevrolet Cavalier

1 Answer

Noise like a dry bearing at 20-45mph

I had a new tire put on l/r tire was bad noise got less put can still hear it

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

See if the rim is bent or if there is mud packed on the inside of the rim if so clean with a wire brush or get a new rim for a scarp yard

Posted on Sep 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just put brand new wheel bearings axles calipers rotars and pads on my 2005 grand am still hearing a humming noise any ideas


Hello Sam, I don't know if this will help you but I had this same problem. It turn out to be a bad tire causing my noise. Good luck to you.

Oct 10, 2015 | Cars & Trucks

1 Answer

Loud hollow wind noise when accelerating


HI Cindy
The noise you hearing is the rear end bearings going bad
you should get them replaced as soon as possible
the longer you drive on them the more damage you do
and they could lock up

Sep 09, 2012 | 2005 Chevrolet Equinox

2 Answers

Something Humming


sounds like a wheel bearing is going bad

Feb 07, 2012 | Chevrolet Venture Cars & Trucks

1 Answer

Had R/F wheel hub/bearings replaced due to the loud noise it was making. The mechanic said bearing were shot however could still hear a small noise towards left front. He put new hub/bearing on left front...


u joints dont make a whine type noise. could it be tires? rotate tires and see if noise changes. did he hear the noise with the truck in the air? could be the front diff. with a 2006 explorer I would not have put the old bearing back in, its going to need it anyhow, sooner or later.

Sep 12, 2011 | 2006 Ford Explorer

1 Answer

2002 Dodge SX 2.0 I'm getting a howling or ( high frequency vibration of some type) noise from the front end when in motion. Lessens when steering is pointed left of center. No howling when at a...


The first thing I would check is for a bad wheel bearing. If the noise lessens when turning left than I would look at the left front first. Chalk the rear wheels or set the emergency brake. Put the transmission in neutral. Jack up the left side of the car. Grab the coil spring and rotate the tire by hand. If you can feel/hear the noise than your on the right track with the bad wheel bearing. I can give you instructions on how to replace if you need them.

May 26, 2011 | Dodge Neon Cars & Trucks

1 Answer

Bad road noise/tire growl. Thinking it was just the tires, I just changed OE Goodyears (with 33k on them) with new Firestones--and I still hear lots of noise. Car is maintained by the book. 30k service 3...


Have you checked the spindle bearings, what about the rear wheel bearings, jack up the car and spin the wheels, start the car and put in drive for the front wheels (you might have to sit inside and shut the door to hear it), always stop the wheels from turning before putting back in park.

Dec 29, 2010 | 2008 Nissan Maxima

1 Answer

My jeep has a whining noise sounds like in front right tire area. had to 3 mechanic they can't figure what it is


The only thing that can cause a whining noise in that area is a bad wheel bearing.
The bearing in yours is a large double set of rollers that is fairly strong. As such, it's possible that if one roller is bad it can make noise without the bearing becoming loose or binding. When checking on a lift there is no load on the bearing and therefore it may be difficult to hear the noise.
The bearing is pressed into a hub assembly that is replaced as a unit. New they are around $200
used are far less ($40-$50). If you want to do the job yourself, you need to remove the wheel, brake caliper, rotor and axle. The hub is bolted in from the backside. It's time consuming but not that difficult. You will need a chilton or haynes manual for the specifics and if you get stuck along the way, ask and I can help.

Oct 25, 2010 | 2004 Jeep Grand Cherokee

4 Answers

Honda Pilot 111,000 miles. Wheel or tire noise?


it can be any of the above, rotate the tires and see if the noise location seems to change, but the last thing i would suspect is the CV, they just click when turning, the wheel bearing is my choice here, they roar, tires make a diff noise.

Jan 29, 2010 | 2003 Honda Pilot

1 Answer

Whining noise from front end while driving


you have a bad front wheel bearing..jack up front of vehicle..put in neutral..block rear wheels..put 1 hand on front coil spring and rotate wheel..you will feel roughness in spring on side that wheel bearing is bad

Jun 14, 2009 | 2004 Dodge Stratus

Not finding what you are looking for?
2003 Chevrolet Cavalier Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...