Question about 1996 Chevrolet Monte Carlo

2 Answers

My car will not go in reverse but will go forward

My car will go forward but not in reverse and it sounds terrible under the hood and before it did this it was making a little pop noise when I would turn the stering wheel to the left and I just crank my car up one day and put it reverse and something popped and fell apart inside and it will not go in reverse

Posted by on

  • Anonymous Feb 02, 2009

    i have the same problem. i was driving the other day and it just acted like the tranny went.. now i only have 1 and 2 gear that is it and park nothing else.. do i have to replace the tranny?

  • Anonymous Mar 13, 2014

    When you first crank veh in morn and put in gear car will hesitate just a little then every thing is good does it in reverse or forward

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 123 Answers

Typical FWD GM transmission issue, the transmisson will have to be rebuilt. You could try a fluid flush and filter change but there are only 2 discs pack for reverse. Which makes them fail very easily

Posted on Oct 17, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Trailblazer will drive in neutral and in drive but not in reverse

Posted on Jan 09, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 Chevy Silerado has a terrible grinding noise in reverse and doesn't work at all? All forward gears are fine. Suggestions?


My advice is don't causecany more damage more than necessary. Sounds like it is going to collapse , suggestvyou have it checked out by the professionals. Think you are going to need a replacement unit

Oct 10, 2014 | 2008 Chevrolet Silverado 1500

1 Answer

When I first put the car in drive and drive forward a little bit it makes a ptunk sound, then when I put it in reverse and back up a little the same ptunk sound is made. When I switch between drive a


May need to have the transmission flushed.
before you do that , put the car on a lift, raise
the car,run the car and switch gears while someone listens
for the sound for exact location.

Jan 16, 2014 | Toyota Cars & Trucks

1 Answer

My 1997 Geo Tracker sdtarted making a popping/clicking sound today when I pushed the gas. Then it startede making a noise like I scraping metal on the pavement. I got out and looked bu did not see...


Can't tell from here but apperantly one or more parts to your suspension or brake system have failed, sounds more like brake or wheel assembly or trans axle to me. Take the front wheels off and have them checked out before driving again.

May 13, 2011 | Chevrolet Tracker Cars & Trucks

1 Answer

Heater steams up all glass on inside of car


pop the bonnet(hood) right under the windscreen rubbers you will see a blavck plastic box about 3feet wide,clean out the drain under the fan unit,it is blocked with s...

Apr 26, 2010 | 1992 Audi 100

2 Answers

I have a 2005 Dodge 1500 with a 5.7 Hemi. when I start out in forward or reverse it makes a popping noise sometimes and you can feel it shaking.


Just a guess, but it sounds like the U-joint on your drive shaft could be going…With a cool vehicle of course, you should be able to lay under the vehicle and physically grab the drive shaft and turn it back and forth and hear a clang or feel the looseness etc…You won’t hear the pop till the torque is applied...It’s not an expensive job, of terribly difficult to repair yourself…tg

Mar 15, 2010 | Dodge Ram 1500 Cars & Trucks

1 Answer

Can't pop hood on 2007 Chevy Tahoe


Sounds like the "hood release cable" pulled loose from the clip uneder the hood ...you will have to take a long nose plier reach up from under the car to where the under hood latch is and see if you can get hold of the cable / latch mechanism and release it that way . as far as the battery sounds like the battery is not holding a charge .

Jan 10, 2010 | 2007 Chevrolet Tahoe

2 Answers

Squealing noise when in reverse


Is the noise under the hood? or where?

If under the hood, most likely the engine has a bad motor mount. The engine will "twist" slightly to one direction when driving forward and "twist" in the opposite direction when you drive in reverse.

When it is twisted (in reverse) an engine pulley or fanbelt is scraping on some plastic part, or whatever, and making the noise.

If not under the hood, it may be one of the front brake pads that have a "worn brake pad" sensor. The sensor is an L-shaped piece of metal that scrapes the rotor when the brake pad backing gets too close to the rotor, hence worn brake pads.

If the noise is somewhere else, maybe another "expert" has a suggestion.

Please post more information... Thank you.



Sep 10, 2009 | 2001 Hyundai Accent

1 Answer

Shifter stick kept popping out of gear. eventually ended up with just reverse. the car runs and starts however, it sounds like a grinding noise when i try put it into 1st or 2nd. the noise is coming from...


It sounds like the hyd. clutch is not working. If the clutch won't release then you can't get the transmission in a gear while it is running, without that grinding noise.

Apr 07, 2009 | 1999 Chevrolet Cavalier

1 Answer

Noise from driver side under hood


This noise is likely caused by your intermediate steering shaft. The issue is well documented among Aura owners. GM claims that the noise is not a problem as far as safety or vehicle function though they will attempt to repair if brought in under warranty. If out of warranty, you can safely ignore it as nuisance.

Dec 26, 2008 | 2007 Saturn Aura XR Sedan

Not finding what you are looking for?
1996 Chevrolet Monte Carlo Logo

1,621 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...