2005 Toyota Highlander Logo

Related Topics:

Posted on Dec 27, 2010

How do you engage 4 wheel drive on 2005 Toyota Highlander?

4 Related Answers

Anonymous

  • 984 Answers
  • Posted on Dec 20, 2009

SOURCE: 2005 ford f-150...4 wheel drive will not

Operationally vacuum holds the IWE ( Integrated Wheel Ends ) out, and once vac is removed the spring engages the IWE.

Lift and support the front of the truck so the front wheels are off the ground ( take safety precautions, chock wheels, jack stands, etc )
Key on, engage 4x4 and try to turn the front drive shaft.
If it turns it is a problem with the transfer case.
If it doesn't it is a front axle engagement problem.

- If the front drive shaft does not turn :
Shut of the truck ( still jacked up, and supported ) remove the vac lines from the IWE. The spring should push the gears in, without the vac line on.
Check the vent line ( tube that is routed into the engine compartment with nothing attached to it ), for blockages.
If the vent line is clear, and with the vac lines off the IWE should be engaged ( both front wheels locked ).
If they lock, the problem is with the IWE solenoid not shutting off vacuum to the IWEs. There is a TSB on the 2004-2006 IWE solenoids, a newer revision has been made, and used from 2007 and newer MYs.

Here is a block diagram of the IWE system
b3ce05f.jpg

Ad

Anonymous

  • 740 Answers
  • Posted on Dec 21, 2008

SOURCE: ECT snow feature Toyota Highlander 2005

Turn vehicle on, with foot on brake put vehicle in NEUTRAL. Still holding brakes move 4x4 switch to 4 wheel drive, it should engage. The ECT snow is just s feather that make the transmission take off in 2nd gear so its not a fast take off and you wouldn't skid. Good Luck

tuyen bui

  • 1025 Answers
  • Posted on Feb 25, 2010

SOURCE: 2005 F150 5.4 will not engage 4 wheel drive. Just

check to see if you hear any grinding noise in the front wheel, if there is then one of the actuator in the front wheels is bad. the dealer sells for around 120.

Anonymous

  • 34 Answers
  • Posted on Dec 10, 2010

SOURCE: How put 4 whels drive

If your Highlander is AWD - that means it automatically detects when you need extra traction - and the other wheels engage automatically. You can't turn it on or off manually. If it's not working, you either have the 2wd model - or there is a problem, and you should take it to your favorite shop. Good luck!

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

I have a 2005 Toyota Highlander 6 cyl 4 wheel drive. What is the ETC button for?

ECT button makes car start in second gear stopping wheel spin in snow.
0helpful
1answer

Turn light will not turn off, not blinking, When turn on signal or 4 way flashers goes off for a few seconds then comes back on

2006-2015 Toyota Highlander MAINT REQD Light Reset

seventrumpet.com/2006-2015-toyota-highlander-maint-reqd-light-reset/
Mar 15, 2015 - How to MAINT REQD Light Reset on Toyota Highlander 2006, 2007, ...Turn the ignition switch to the "On" position, but do not start the engine ... This procedure should applies to the second and third generation of the Toyota Highlander (2005, 2006, 2007, 2008, ... Your email address will not be published.
0helpful
1answer

My 4 runner wont engage in 4 wheel drive

could be the transfer case switch is seized up, sometimes the plugs get dirty or out of alignment. could be the switch on the dash or a bad fuse
0helpful
1answer

How do you turn on/off 4 wheel drive

most of them are all wheel drive meaning that they are 4 wheel all the time ,,,but if you have a shift on it, then you can shift it to 4 wheel drive. if you just want it for wet/icy roads though AWD is safer than true 4wd in those conditions. good-day !
0helpful
1answer

How do you engage (operate)the 2003 toyota highlander awd system

awd means all wheel drive,so toyota highlander was front/rear 50:50 fixed torque split
0helpful
1answer

2005 Highlander: I don't think four wheel drive is working. How can I determine? Is there a switch for four wheel drive, as someone suggested?

Are you sure your vehicle is a 4 wheel drive version? Double check your model information to make sure. If it is, technically, it is all wheel drive - meaning the other wheels engage automatically when the vehicle detects that they are needed. I have an 05 Highlander AWD, too. Good choice. I love mine! Good luck.
0helpful
1answer

Friend has a Toyota Highlander that says 4x4 on the outside, but she can't figure out how to put the vehicle in 4 wheel drive. Can you help?

The Highlander (All Wheel Drive version) is a full-time 4 wheel drive vehicle. There are no controls or switches - it is always in four wheel drive mode.
0helpful
1answer

How put 4 whels drive

If your Highlander is AWD - that means it automatically detects when you need extra traction - and the other wheels engage automatically. You can't turn it on or off manually. If it's not working, you either have the 2wd model - or there is a problem, and you should take it to your favorite shop. Good luck!
29helpful
2answers
3helpful
1answer

ECT snow feature Toyota Highlander 2005

Turn vehicle on, with foot on brake put vehicle in NEUTRAL. Still holding brakes move 4x4 switch to 4 wheel drive, it should engage. The ECT snow is just s feather that make the transmission take off in 2nd gear so its not a fast take off and you wouldn't skid. Good Luck
Not finding what you are looking for?

2,107 views

Ask a Question

Usually answered in minutes!

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...