Question about 1993 Chevrolet K1500

1 Answer

Brakes how to bleed the brakeline

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 131 Answers

There is 3 ways. 1 by yourself, you can let gravity help. Start with the farthest wheel. Open the valve and let the fluid run into a catch can. Not for long, and do this several times per wheel. Check your fluid reservoir often.
2 With help, have someone pump up the brake pedal and hold it. Open valve, then close it then let off pedal. Do this several times per wheel. Check reservoir often.
3 Use a brake bleeding tool. Some auto parts stores will rent them. Follow the instruction.

Posted on Jul 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change front left brake hose on 2006 Pontiac g6


Remove the wheel,take the caliper off like you would do to change the brakes,follow the brakeline up to the master cylinder,unscrew it, go back down to the caliper and remove the bolt holding it to the caliper.( its best to drain the brake reservoir before you do this. Bleed the brakes when you are done)

Aug 06, 2014 | Cars & Trucks

1 Answer

Bleed master cylinder


Brakeline behind wheel , Loosen it first hold down or pump brakes, This takes two people. one to pump up one to losen brake line, Keep repeating till breaks get stiff, then hold down and retighten breakline.

Apr 08, 2014 | 1997 Mercury Sable

1 Answer

Cars brake bleeding sequence


You always start from the longest to the shortest brakelines.

Mar 25, 2014 | 2009 Ford Flex

1 Answer

How often should you bleed the brakes for a 2006 ford freestar?


You only need to bleed the brakes when you crack the system to put on a new caliper or pads or shoes or slave cylinder or brakeline or flex hose etc.

Nov 27, 2013 | 2001 Ford Taurus

1 Answer

Front brakes wont fully release


There's air in the hydraulic system - bleed the brakelines to get rid of any air in the system. When braking air get compressed to a tiny pocket, when releasing it expansed and cause the brakes to still hang on to the disk for a while.

Jun 28, 2011 | 1992 Cadillac DeVille

1 Answer

My brake peddle is to the floor. Can hardly stop. Is it the brakeline/


Do not drive the vehicle until it has been repaired. You will endanger your own life and others. The problem could be worn out brake pads and brake shoes, leaking brake fluid at the wheel cylinders or calipers. Have you checked the brake fluid reservoir to see if it needs fluid? Make sure it is full of brake fluid. With the engine running, pump the brake pedal several times. If it comes back up, then slowly bleeds back down, youv;e either got air in the brake lines or you are leaking brake fluid. You need to have the brakes repaired as soon as possible.

Dec 25, 2010 | 1993 Geo Prizm

1 Answer

Broken brake line


replace whit newone autozone has good brakeline at good prices .jack the car use jack stands take tire off find both ends use a 10mm wrench.take off replace bleed system gavity feed fill brake master cilinder leave cap off start from rightfront to rightrear ck fluid then leftrear & then leftfront. make sure ther is no air in the brake system.

Nov 06, 2009 | 1996 Mercury Sable

4 Answers

How do i bleed the brake system


First, before you do the bleeding, did you "open" any of the lines? Was there a caliper replaced?

If no line was opened, you do not need to bleed the brakes.

If so, please let me know and I will post the bleed procedures for you.

Why are you thinking about bleeding the brakes? Spongy brake pedal?

Oct 08, 2009 | 1995 Chrysler Town & Country

1 Answer

Brakeline


It is possible to replace a bad portion of brake line using compression fittings,and alot of parts stores do fabricate and sell brakeline if you take the old piece(s) in for a reference.If you do pull the line from the resevoir your going to have to bleed the entire system incuding the master cylinder,If you have the means I would reccomend taking it to a shop that specializes in brakes,they have the tools and experience to do the job correctly and it really shouldn't be to expensive.If you are going to DIY write me back and I'll give you a walk through on the procedure.

Apr 10, 2009 | 2001 Kia Sportage

Not finding what you are looking for?
1993 Chevrolet K1500 Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...