Question about 1992 Chevrolet Camaro

4 Answers

92 chevy camaro rs 350

Hi my camaro is pain .starting the it start fine.butwhen engine gets hot and shut off .start engine up again it crank slow if you let it cool down it start uplike noral.is it the starter or the battery ,

Posted by on

  • Anonymous Mar 31, 2014

    I have a 89 Chevrolet Camaro with a 69 Chevy 350 and I can't get it to start did I buy the wrong size starter it's a 3510 is the part number do I hook up the wire to the small solenoid next to the block I just small solenoid anyway from the block

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try the ignition control module in the distributor that is what is sounds like to me

Posted on May 03, 2009

Chances are your statrer is getting too hot from the exhaust manifold, is thier a heat shield on the starter if not "get one" if thier is its probably a exhaust leak right around the starter. but the problem is the actual starter is getting too hot, figure out a way to keep it cool. Protect it.

Posted on Oct 13, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

If it gets warm and shuts off, and it cools down and it cranks over, it could be the thermostat.

Posted on Sep 14, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 2,039 Answers

For what i can understand our timing locks to hight when cold starts good when hot hard start timming is to high get it check out HOPE IT HELP FIXYA OUR POST PIERRE

Posted on Jul 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1983 oldsmobile cutlass supreme wont start


I had some issues when I changed my olds 307 to a slightly modified olds 350 rocket, it would start fine cold, but hard cranking or slow, painful cranking when hot. Alot of it was the carbureator was allowing too much or too little fuel into the engine. I rebuilt the carb twice. The first time I didn't have a full understanding of float level drop and measuring as far as bending the brass tangs. The second rebuild I finally was able to remove a large part of the hot starting issue, along with retarding the timing as well. But it still isn't gone.

Nov 19, 2011 | 1983 Oldsmobile Cutlass Supreme

1 Answer

WE OWN 92 CAMARO RS 25TH EDITION IT WONT START ITS GOT FIRE POWER AND SPARK SO NOW WHAT ITS DRIVE ME CRAZY WHAT TO DO. WE CHECK THE SPARK PLUG AND BATTERY AND ITS GOT GAS BUT IT WONT START WHAT DO U THINK...


92 Camaro, V8 5.7 multi port, new pump, good preasure. runs when primed, wont start without prime. After sitting a few minutes, engine fires wont start. How to check EGR Valve and what does it do?

Feb 15, 2011 | 1992 Chevrolet Camaro

1 Answer

How do i reprogram my ignition switch n my 92 camaro rs.i will not start ,brand new starter,ignition switch. new fuses.all the power comes on.


You can't. I just replaced mine on my 92 Camaro and it's a pain in the ***. You can only install the ignition switch one way, then you have to make sure that the rod coming off the tumbler (where your key goes) is in the right spot.

Nov 14, 2009 | 1989 Chevrolet Camaro

2 Answers

1998 camaro I have replace the fuel pump and filter, car would crank but not start. The next day it started fine twice, the third time it spit sputtered coughed and did everything but start. I now think it...


its not your crank sensor its your starter. i just went through the same thing. i have a 1998 chevy camaro 350 lt1. if thats not it its in your stering colum

Oct 16, 2009 | 1998 Chevrolet Camaro

1 Answer

2000 silvarado 5.3 vortech runs good for awhile after it gets hot it shuts off and wont crank until it cools off


do you mean wont crank over and start till it cools off? if thats the case it sounds like you got a bad crankshaft position sensor,,thge sensor is fine when its cold and warm but when it gets hot it goes open and the cars computer cant see the rpm and shuts the engine off,and then when it cools off the sensor works again and the car starts and is ok till it gets hot again,if thats the case thats what it is,,,hope this helps,,,about $100 for the part

Oct 07, 2009 | 1985 Chevrolet Chevy

1 Answer

92 RS Camaro, Replaced battery and now car has no power?


are your battery post bolts clean and tight, my 89 rs ran fine untill i decided i wanted shiny new battery bolts, when i put them in and tightened them down my car had no power at all, i checked how tight they were, and they were TIGHT so i wiggled the black cable and re tightened it and bam my lights turned on, tryied starting it, and it started, sometimes you just gotta make sure the connection is really good, not just how tight it is, also check your ground wires, there are a few but the main 2 are located at the front pass side next to the batt, and on the back firewall going from the bottom pass head to the firewall, hope that helps, if not comment back

Mar 17, 2009 | 1992 Chevrolet Camaro

1 Answer

No spark in my 1992 Chevy Camaro RS 3.1L engine rotates but doesn't engage.


Hi Candie, if you have air, fuel and spark it should run. Getting to the fuel side-"is fuel getting into the engine?" Your ignition may work, your starter may work, fuel pump may work, but if you have an ignition key with a resistor inside it (little silver piece of metal in the plastic of the ignition key) the key, it could be bad and will shut down the fuel injector. It's part of the security system if some idiot tries to break the steering column to steal your car. It won't run.
I have a 92 Z28 with a 350 and I had to get a new ignition with resistor and correct resistor ohm key. About $400.00 bucks but if you search around Z28 forums there are ways to bypass this for less $$ if you want to.

Aug 05, 2008 | 1992 Chevrolet Camaro

Not finding what you are looking for?
1992 Chevrolet Camaro Logo

489 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...