At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I recentally installed a brand new raidaitor in my 1995 honda passport 3.2 L 4 wheel drive ,and also replaced the theromstat with the recomended 170 degree one and now my windshild defroster dose not work as well as it used to,i seem to get the truck interior warmed up ,but the windshild dose not totally clear,and takes along time to work.
Re: I recentally installed a brand new raidaitor in my...
No wonder w/a 170 it take all day put a 195 or 190 . 170 is fine for summer but winter got to have a little higher one not going to hurt nything just get warm faster & better
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sounds like from what you describe it's a leaking break caliper. The best thing to do is get a rebuilt one. It's best to replace them in pairs. Also replace or clean the brake pads thoroughly!
The studs will come out by hammering them out. On the inner side of the hus there should be a hole large enough to remove and replace these wheel studs
No special tools needed, this Honda has the old type inner and outer wheel bearing's, remove cotter pin, spindle nut slide rotor out, remove wheel bearing, repack new bearing with grease and don't forget to replace grease seal's, install new part's adjust spindle nut and install cotter pin.Good luck,hope this was very helpful.
×