.the shifter on the column will move freely from the park position ,but will not go into any gear !! could this be in the electronic shift module or what? wife drove to store came back out ,and would not go into gear.. the trans not leaking fluid and was no indication of any pblms like slippage
Comments:
Jul 22, 2008
- WELL IT ENDED UP BEING MY SHIFTER CABLE INSIDE THE CLOUMN FOR ANYONE WITH FUTURE PROBLEM LIKE ME / THNX FOR REPLYING .. YEAH IT IS KNOWN PBLM WITH THE 2000 EXPEDITIONS
-   2003 Expedition with same shift cable problem. A CHEAP Ford clamp that held cable against firewall, let loose and cable melted outer cover from exhaust manifold. Inner cable merely pushed in and out of melted hole, thus not shifting. NOT covered by warranty, but was in a service bulletin warning dealers about this.
-   Guest
Feb 08, 2009
-   how do you replace the cable? -   jessevmartin
Jul 15, 2008
-   SOMETIMES THE 4X4 COMES ON WITH OUT BEING TURNED ON.-   Guest
el problema que tiene es que pierde fuerza en las subidas les agradeceria mucho si me alludan una...
(More)
el problema que tiene es que pierde fuerza en las subidas les agradeceria mucho si me alludan una resolución el problema
i need to know what wires are the ground and air temp sencer on a 6 wire mass air flow sencer on a...
(More)
i need to know what wires are the ground and air temp sencer on a 6 wire mass air flow sencer on a 4.0 2000 ford explorer xlt
I can't locate the IAC and TPS valve & sensor.. I need a exploded view of 97 ford...
(More)
I can't locate the IAC and TPS valve & sensor.. I need a exploded view of 97 ford expedition's carburator..