Question about 1993 Chevrolet Cavalier

1 Answer

Electrical schematic Where do I find an electrical schematic? Several wires going to cooling fan have melted.

Posted by on

  • phutchen Aug 23, 2008

    no power to coils

  • Anonymous Mar 16, 2014

    wires from light control to fuse box melted need wiring schematics

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 67 Answers

Look, usually in the back, of a good service manual. Manufacturer shop manuals, Haynes, and Chilton's usually all have wiring schematics.

Posted on Aug 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a dayton electric pallet model 2leb8..the fan got tore off and i can't figure out the wiring of it.where they go..the schematic shows one wire coming out of the fan into a switch but un


hi there

i found some electrical schematics at the site below, pages 16, 17, 19 and 20.

if not exactly what you need, there should be enough information to help figure it out.

good luck! (:

http://www.grainger.com/ec/pdf/Dayton-Electric-Pallet-Truck-2LEB8-OIPM.pdf

Oct 26, 2014 | Cars & Trucks

1 Answer

Replaced Blower Motor and Resistor.AC works but the Blower Motor relay Keeps melting.


So you need a repair shop or dealer to do the
required testing to find & resolve ALL wiring
& electrical problems

You do not want a guess from an internet site
Doesn't work that way

Need wiring diagrams,lots of your time to explain the
issues & some detailed & possibly lengthy & for you,costly
labor time, to just find the main issue

Jul 16, 2014 | 2001 Dodge Durango

1 Answer

Need electrical schematics for 2000 Oldsmobile Intrigue,under hood,cooling fans not coming on.


I dont have a schematic but check the thermal fan switch, Its like the ect for the radiator

Oct 07, 2011 | 2000 Oldsmobile Intrigue

1 Answer

Cluch fan is not working have installed new clutch fan and have power at main fuseis relay under fender and what number is the fuse in the cab.


You need to look for a 12V thermostat kit for your electric fan.

Autozone link HERE
See pic below
07b5614.jpg

It has a electric thermostat,relay and wiring.

Check the maker of the fan. They alway has a kit to go with the fan.

DO NOT tap into the fuse box.

It will keep draw so much current and it will melt the wiring on the long ran.

Without this kit,it will also drain you battery.
Most electrical cooling does not has a built-in thermostat.




Jun 29, 2010 | Cars & Trucks

1 Answer

I replace the fan clutch and i still have the code p1481 what does that mean? 2002 chevrolet Trailblazer 4.2 Thanks You! Arthur Tyler


TSB#05-06-02-012B: Service Engine Soon (SES) or Check Engine Light On, DTC P0480, P0526/P1481/P1484 Set (Replace Engine Cooling Fan Wiring Harness) - (Oct 19, 2006)
Subject:
Service Engine Soon (SES) or Check Engine Light On,
DTC P0480/P0526/P1481/P1484 Set (Replace Engine Cooling Fan Wiring Harness)
Condition
Some customers may comment that the Service Engine Soon (SES) or Check Engine light is illuminated. This condition may be intermittent and upon investigation, the technician may find either DTC P0480, P0526, P1481 or P1484 set.

Cause
This condition may be caused by the cooling fan harness chaffing against the plastic guide it routes through. This
contact may damage the insulation of the wires enclosed in that harness.

Correction
Replace the engine cooling fan harness using the procedure listed below.

1. Remove the cooling fan. Refer to the Cooling Fan and Shroud Replacement procedure in the Engine Cooling sub-section of SI.

2. Place the cooling fan assembly on a bench.
Disconnect the harness electrical connector from the cooling fan clutch.

3. Remove the harness from the plastic guide while feeding the wires out of the slot.

4. Before installing the new harness, wrap the affected area on the wires with electrical tape to keep the protective sleeve in place. Be sure to keep the tape approximately 25 mm (1 in) away from the connector so the wires can be fed into the slot.

5. Feed the wires into the slot and install the harness to the plastic guide.

6. Connect the harness electrical connector to the cooling fan clutch.

7. Install the cooling fan. Refer to the Cooling Fan and Shroud Replacement procedure in the Engine Cooling sub-section of SI.

Part Number 89024920

Description
Harness Assembly, Engine Cooling Fan Wiring
Thank you for using fixya.

Apr 29, 2010 | 2003 Chevrolet TrailBlazer

2 Answers

Cooling Fans electrical connector melted. Is it available?


you can get one off of a used car but your still going to have to cut the wires. I would just directly connect it and eliminate the plug altogether just make sure you don't mix the wires up and you shrink wrap or use black electrical tape to re-insulate the wires and keep them from shorting out. If it burned up or melted this would be a good time to reroute the wires to a different location so this will no longer be a problem. It should work fine and give you no problems if the fans are still good as you say I hope this helps please don't forget to rate

Jul 23, 2009 | 1998 Dodge Intrepid

1 Answer

I'm looking for a wiring schematic for the electrical cooling fans on a 1996 chevy lumina car my girl let her exbf straight wire it and now its not working properly i'm sure i can fix it if i can just find...


Hello freak4style, my name is JShreader. Thank you for choosing fixya.com.

Click HERE for the Wiring Diagram for the Fan Circuit on your Lumina. I hope this helps you. If you have any more questions or need any more diagrams, please don't hesitate to ask...Thanks again, JShreader!

Apr 01, 2009 | 1996 Chevrolet Lumina Mini

1 Answer

1994 BMW 740iA electrical fire under hood. Cannot find proper electrical wiring diagram. Wiring is burned from 8 wire 12 pin connector and is melted into the main wire trunk that travels along the left...


Check out this link. It is to RealOEM and will provide you the BMW product codes and descriptions you need to find the replacement harness, http://www.realoem.com/bmw/showparts.do?model=GF63&mospid=47526&btnr=12_0585&hg=12&fg=28

Also, the link below is to provide you schematics for your engine wiring harnesses. You did not indicate which engine you had (diesel or gas). The link provides access to schematics for both engines. http://www.bmw-planet.com/diagrams/release/en/e38old/index.htm From the main menu, select: Drive, then your engine and then select engine electrical system. As far as the cause, you didn't mention what the source of the fire was. Check online for recall notices for your specific model. A google search will yield several links to sites that list recalls for yyour vehicle. It will let you know if there are any known issues regarding engine compartment fires for your model....

Mar 06, 2009 | 1994 BMW 7 Series

2 Answers

Code 1481


SOMETIMES THE WIRING HARNESS GET DAMAGED WHEN FAN REMOVED. GM HAS BULLETIN TO REPLACE COOLING FAN WIRING HARNESS PART# 89024920
Harness Assembly, Engine Cooling Fan Wiring
  1. Place the cooling fan assembly on a bench.
  2. Disconnect the harness electrical connector from the cooling fan clutch.
  3. Remove the harness from the plastic guide while feeding the wires out of the slot.
  4. Before installing the new harness, wrap the affected area on the wires with electrical tape to keep the protective sleeve in place. Be sure to keep the tape approximately 25 mm (1 in) away from the connector so the wires can be fed into the slot.
  5. Feed the wires into the slot and install the harness to the plastic guide.
  6. Connect the harness electrical connector to the cooling fan clutch.
  7. Install the cooling fan. Refer to the Cooling Fan and Shroud Replacement procedure in the Engine Cooling sub-section of SI.

Nov 25, 2008 | 2003 Chevrolet TrailBlazer

1 Answer

Cooling fan is not working


INSPECTION 1. Check for a burnt fusible link with an ohmmeter. 2. If a fusible link burns out, there is a short or some other problem in the circuit. Carefully determine the cause and correct it before replacing the fusible link. The fusible link will burn out within 15 seconds if a higher than specified current flows through the circuit Radiator 30A Pink
cec4884.gif

Jul 13, 2008 | Hyundai Motor 1998 Sonata

Not finding what you are looking for?
1993 Chevrolet Cavalier Logo

Related Topics:

356 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...