Question about 2003 Ford Expedition

1 Answer

Clicking sound When I turn on the ignition switch I hear a clicking sound coming from inside the right rear panel by the rear hatchback.

Posted by on

  • 1 more comment 
  • Anonymous Jul 22, 2008

    Clicking sound in right rear quarter panel inside when vehicle is running.

  • zacaras Jul 25, 2008

    i heard a noice in the rear side of my expedition don't know what to do?

  • Anonymous Mar 16, 2014

    hear liquid drops from the engine when turning the engine off after returning from a couple of hour drive sound like something is leaking inside the engine



1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try changing the temperature of the rear a/c if the sound stops, check the rear a/c servo that controls air flow/termperature.

Posted on Jul 28, 2008

  • lilmal66
    lilmal66 Nov 22, 2012

    if not what then



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the starter relay on a 1995 Mitsubishi Mighty Max PU

It sounds more like you have a bad connection somewhere or possibly a weak battery.

Mar 24, 2016 | 1995 Mitsubishi Mighty Max

1 Answer


Perhaps the impact fuel cut-off switch is triggered. It is located inside the right rear quarter panel, above the tire jack. Press the reset button on the switch block and the fuel pump should start.
Sometimes closing the hatchback triggers it.

Apr 04, 2014 | 2001 Ford Windstar

1 Answer

1998 buick regal blower motor and resistor making a click sound on high but will not turn on

You should always make sure that the parts you put back are compatible with the parts you take off. If i am not mistaken, there is another fan resistor outside under the hood, and one inside under the passenger side dash panel, if your motor is inside. One outside is for high, and the one inside is for low, medium, and medium high. If you know for a fact both speed control resistors are good, replace the switch on the dash panel. To check to see if the dash switch is not making good contact, take the switch while it is still in, and on low, high, or medium, push the switch lever to the right or left gentlely to see if it makes any contact. These year model cars are notoriuos of having fan motor issues early........

Jan 28, 2014 | Buick Cars & Trucks

1 Answer

I have a 2004 ford explorer. I recently back into a pole and now there is a loud clicking noise coming from the rear left side

you have a fuel interuptor or fuel cut off switch best way to locate the switch is to have someone turn the switch on and off with the back hstch open whilr keys turned off and on. there are 2 panels on left and right at the inside of truck,detect where the click comes from when keys turned off and on. simply push in on the red button under the panel. either left or right. remove both panels at rear gate to determine where the clicking is coming from.push the red erset button and truck should start.

Sep 23, 2011 | 2003 Ford Expedition

1 Answer

1988 mazda 323 hatchback, 212K miles. Tried to start this morning, no go. Cabin lights and radio came on, ignition switch turns, but no "click-click-click" sound. I think the starter isn't connecting...

I would have the system checked by a starting/charging analyzer. If the draw is 1 or 2 amps and the starter doesn't turn, the starter will have to be replaced to replace the bad solenoid. Also, if the draw is 75 to 125 amps and it doesn't turn, the starter is bad.

Normally, a starter should draw 75 to 125 amps and turn vigorously, assuming the battery connections are ok.

Oct 12, 2010 | 1988 Mazda 323 Hatchback

1 Answer

Chevrolet trlblzr LTZ 2002. Everytime I turn the

first you have to get the part number from the dealership, they use the vin to get the right one then try i got an accuator for $57 when dealer said $105 for my envoy

Feb 21, 2010 | 2002 Chevrolet TrailBlazer

1 Answer

My 1996 honda accord wont start. all the lights and inside check lights come on, but it won't turn over, no click, just silence.

Sounds to me like you should start by checking the battery. However, it could also be the ignition switch. Try turning the key to the "ON" position, but do no try to crank the engine. If you can hear a whining noise (the fuel pump), I'd be more inclined to say it's an issue with the battery or starter. If you can't hear anything still, I'd lean more towards a totally dead battery or a bad ignition switch. If the lights are on on the dash and seem to be bright and not dim when trying to start, it's probably more on the ignition switch end of things. Electrical problems when having a "no-start" issue can be very tricky to trace. It could even come down to a blown fuse for the ignition switch.

I know that's a lot to look into, but no-start problems tend to take more diagnostics than most other issues.

Good luck.

Mar 03, 2009 | 1996 Honda Civic

3 Answers

98 Buick Lesabre Blinker Problem

If ALL Wiring in Trunk is Good Then Its The SWITCH = Multifunction Switch<<

Feb 11, 2009 | 1997 Buick LeSabre

Not finding what you are looking for?
2003 Ford Expedition Logo

Related Topics:

441 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers


Level 3 Expert

5572 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides