Question about 2001 Honda Civic

2 Answers

Honda Civic Engine Problem

The engine of my 2001 Honda Civic keeps running unless I top off the gas tank - even when I don't have to. As soon as a drop of gas falls into the tank, the engine shuts off. What is the problem and how can it be solved?

Posted by on

  • Anonymous Jul 31, 2008

    CRANK POSITION SENSOR

  • Anonymous Mar 16, 2014

    95 honda civic, does the arrow on top of the piston ponit to the frount of the engine or to the rear of it

×

2 Answers

I have a 94 honda civic dx with a d15b7 and bought a t3 t4 turbo. and i need help figuring out the boost controller?

Posted on Jul 27, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 362 Answers

They are designed wih presure need to be in tank when you fill the car with engine runnig the gas cap removal will cause the engine to stall especially one with a week fuel pump.

Posted on Jul 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dtc p1457,0107


P1457 HONDA - Evaporative Emissions Control System Leakage EVAP Canister Systemxicon.jpghttp://engine-codes.com/p1457_honda.htmlForum CodePossible causes- Missing Fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap There is a Honda factory service bulletin with information on how to diagnose the P1456 on the following Honda models:
1998 Honda Accord
1999 Honda Accord
2000 Honda Accord
1998-2000 Honda Accord
symptoms- Engine Light ON (or Service Engine Soon Warning Light)
- Possible a noticeable fuel odor caused by the release of fuel vaporsP1457 HONDA Description The evaporative emission (EVAP) control system stores fuel vapor from the fuel tank in the EVAP canister temporarily to prevent it from escaping to the atmosphere and to enable it to be drawn into the engine by intake manifold vacuum and burned. In addition, the onboard refueling vapor recovery system (ORVR) stores fuel vapor generated when refueling in the EVAP canister.

The EVAP control system leak detection method improves the accuracy and frequency of the detection by determining faulty components and vapor leakage for each part. The EVAP control system (from the purge valve to the fuel tank) is divided into two parts. One is the "EVAP Canister Side" (from the EVAP two way valve to the purge valve) and the other is the "Tank Side" (from the EVAP two way valve to the fuel tank). There is 0.04 inch leak detection and 0.02 inch leak detection. If the 0.04 inch leak detection results are OK, the 0.02 inch leak detection runs. The P1457 code is detected when the EVAP system has a very small leak.

P0107 HONDA - Manifold Absolute Pressure Sensor Circuit Low Voltagexicon.jpghttp://engine-codes.com/p0107_honda.htmlForum CodePossible causes- Manifold Absolute Pressure harness is open or shorted
- Manifold Absolute Pressure sensor poor electrical circuit connector
- Faulty Manifold Absolute Pressure sensor
- Faulty Engine Control Module (ECM) When is the code detected?An excessively low voltage from the sensor is sent to ECMSymptoms- Engine Light ON (or Service Engine Soon Warning Light)
- Engine rough idle
- Engine hesitation
P0107 HONDA Description The Manifold Absolute Pressure sensor provides instantaneous manifold pressure information to the engine's Engine Control Module. The data is used to calculate air density and determine the engine's air mass flow rate, which in turn determines the required fuel metering for optimum combustion. A fuel-injected engine may alternately use a Mass Air Flow sensor to detect the intake airflow. A typical configuration employs one or the other, but seldom both.


In some vehicles the absolute pressure sensor is built into ECM. HONDA Technical Service Bulletins for P0107 code1999 HONDA ODYSSEY Electrical System 2000 HONDA ODYSSEY Electrical System1998 HONDA ACCORD Electrical System 1999 HONDA ACCORD Electrical System 2000 HONDA ACCORD Electrical System 2001 HONDA ACCORD Electrical System 2002 HONDA ACCORD Electrical System 1996 HONDA CIVIC Electrical System 1997 HONDA CIVIC Electrical System 1998 HONDA CIVIC Electrical System

Jul 25, 2012 | Honda Civic Cars & Trucks

1 Answer

Under 2000 rpms runs bad/hesitates/check engine light


This IAC valve runs only when your foot is off the gas pedal. Mainly to keep the engine from stalling and keeping it at a safe RPM. If it is running bad under 2000RPM, more than likely its the IAC valve or a vacuum leak. Clean or replace the IAC valve....Hopefully this helps!!

Apr 17, 2010 | 2000 Honda Civic

1 Answer

I have a 2000 honda civic hard staring


new auto choke thermostat sensor switch needed

Jan 02, 2010 | 2000 Honda Civic

1 Answer

Hi. I have honda civic 1992, the problem is when I turn the engine off and try to start, it does not start, unless I wait 2 or 3 mins so pls help what the problem is thmks


One of two things:

1 - Coolant sensor for ECU that tells the ECU how hot / cold the engine is (bit like a choke) replace this as it is cheap and good house keeping.

If still no good then:

2 - Blocked tank vent - when the problem happens remove the fuel filler cap and try to start, if it starts fine the vent tube for the tank is blocked. Unblock to resolve. (normally the thin tube that runs down the side of the filler neck, some Civics do have a seperate filter vent on the side of the fuel tank)

If still no good let me know but I am sure it will be one of the above.

Lloyd

Dec 05, 2009 | 1992 Honda Civic

2 Answers

1991 honda civic wagon. would not restart after


SOUND LIKE ENGINE IS FLOODING. FUEL INJECTORS IS LEAKING FUEL WITH ENGINE OFF.TRY FILLING GAS TANK UP.AND PUT A BOTTLE OF FUEL INJECTION CLEANER IN GAS TANK DRIVE AROUND A LITTLE SO THE CLEANER CAN CLEAN INJECTORS.

Sep 10, 2009 | 1991 Honda Civic

2 Answers

My 97 honda civic dx check engine light keeps coming on


Had this issue did you replace the exhaust

Jun 19, 2009 | 1997 Honda Civic

1 Answer

I have a 1990 honda civic hatchback si with an 89 ZC DOHC black top engine.. the rear motor mount is cracked and each time i down shift the engine raddles.. how do i change out the mount? and if possible.....


You will need something to lift the engine so that you can take the pressure off of the mount. It sounds like your fuel pump may be wearing out and it is not responding like it should...The pump on the gas tank should be located on the top of the tank....Under the back seat....

May 07, 2009 | 1990 Honda Civic

1 Answer

2001 honda civic


This problem may be soved but it will take some work, You must drop the gas tank or have a mechanic do it for you and clean the tank out, and look inside to see if there is something inside of the tank,

Sep 16, 2008 | 2001 Honda Civic

1 Answer

1993 honda civic


Try checking the snorkel tube between the air cleaner and the intake. Open the hood, and have a friend try to rev the engine, and watch the tube...my '92's was collapsing and starving the engine, couldn't get more than 3500-4000 rpm. Could also be a fuel pump problem like low pressure or bad line.

Jun 07, 2008 | 1993 Honda Civic 4 Door

Not finding what you are looking for?
2001 Honda Civic Logo

Related Topics:

311 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...