My 1999 chevy surburban service engine light went on I took it to advance autos and used their diagnostic tool and the codes that appeared were P0102 and P0300 what do these mean and how do I fix it
-   my truck is a 2003 s-10 as well and is sluggish starting. If I turn the key forward and wait until the little buzz sound stops (maybe fuel injector) it does a lot better. When my wife gets in it and doesn't let the sound run it's course it cranks and cranks and never starts till she lets the fuel injector buzz. also, the last few mornings i have noticed what seems to be a miss ever so often. truck jerks slightly like it had missed on a cylinder.
-   Guest
Nov 30, 2008
-   hello I have a 2001 gmc safari that is very hard to start when cold. when I finaly get it running and warmed up it idles low, runs rough and hesitates when accelerating. when it was running I noticed the check engine light on so I read the codes and got "p0300 and p0102. also when I was starting it cold it would fire a bit and backfire through the intake then I got it going and it was misfireing on one cylinder for about five minutes. it has had starting problems twice since I had it this year as its been below 0c when Im starting it.
-   Guest
Jul 23, 2008
-   code p0102 on a 1999 gmc k2500 suburban and no g/s reading on the scanner-   smokie67
pedal do freio fica mole quando piso devagar, parece que aciona o Freia ABS mas normalmente...
(More)
pedal do freio fica mole quando piso devagar, parece que aciona o Freia ABS mas normalmente tão mal da impressão
Is the dipstick on the 5.3 motor
in 1999 Z-71 supposed to read
1/2 way in the operating zone when...
(More)
Is the dipstick on the 5.3 motor
in 1999 Z-71 supposed to read
1/2 way in the operating zone when full 6 qts??
I have a 1997 5.7 Liter Cheverolet Z71. The 4 wheel drive is not engaging. I can hear the trasfer...
(More)
I have a 1997 5.7 Liter Cheverolet Z71. The 4 wheel drive is not engaging. I can hear the trasfer case engage and can even hear the difference in the transmission when in 4 Lo/hi when driving. However getting stuck the other day showed me that only one wheel in the back actually turns and that not all wheels are fully engaged. Also, the automatic LED on the dash will flash when trying to engage but never stops blinking as it used too, which was supposed to let me know that the 4 wheel drive was actually locked in. Please Help.
constant clicking noise under dash (near glove box) when engine running/ stays same when fan on or...
(More)
constant clicking noise under dash (near glove box) when engine running/ stays same when fan on or off
1991 Porsche carrera 2 Fan belt warning light goes on and off, no apparent damage to the belts....
(More)
1991 Porsche carrera 2 Fan belt warning light goes on and off, no apparent damage to the belts. Sometimes all of the warning lights come on followed by the audible alarm. After shutting down the engine and restarting all lights are extinquished.