Question about 1989 Honda Accord 4 Door

2 Answers

1989 honda accord ignition not working

When I go to start car & turn ignition first position every thing ok, second position everything ok the when I go to actually start the car it does not work.

Posted by on

  • brdu Jul 06, 2008

    the start not work,

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Check the fusible links under plastic cover under hood. Very common problem on these cars. You'll see "fuses" with plastic clear center, brass color on sides and screws on either side. Look into the plastic and you can see if one is blown. Very cheap part at junkyard.

Posted on Jan 12, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 726 Answers

Need more info like the start does not work ?
or it doesent click on third position?

Posted on Jul 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remote won't open the doors


put the key in the ignition and turn to on (not start) and hit unlock. then turn ignition to off position. do this 4 times the 4th time you turn the key and hit unlock you should hear the doors unlock. then with the ignition still on hit lock and everything should work. this sequence needs to be done quickly to work. - hope this helps

Dec 31, 2009 | 2007 Honda Accord Sedan

1 Answer

2006 honda accord: key stuck in ACC position. won't turn to O position to remove from ignition. car starts fine and is in park.


The same thing happened to my 2003 Honda Accord...took it to the dealership, and they had to replace my shift lever entirely. Something about the cable between the ignition and shift lever not being read correctly...(basically, my car is not reading that it's actually in park and therefore won't release the key)....

Nov 09, 2009 | 2006 Honda Accord

1 Answer

1991 Honda Accord won't start. Battery seems ok


Sounds like the distributor. But you may have a faulty replacement coil..get an exchange and see if it is faulty. I have received many replacement parts that fail prematurely.

Oct 14, 2009 | 1991 Honda Accord

1 Answer

1989 honda accord 4 dr--new battery--starter will not start


make sure your getting full contact with you main positive and ground if nor another thing can be you fuel pump you can try replacing that also

Mar 16, 2009 | 1989 Honda Accord 4 Door

1 Answer

89 Honda Accord Car will not shut off


Sounds like the ignition switch to me. the column should have access without pulling the wheel

Mar 10, 2009 | 1989 Honda Accord 4 Door

1 Answer

Car was stolen broke the ignition


REMOVAL

  1. On models equipped with airbag, disarm airbag as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.
  2. On all models, disconnect battery ground cable.
  3. Remove ignition switch as described under STARTING AND CHARGING SYSTEMS/COMPONENT REPLACEMENT AND REPAIR PROCEDURES/IGNITION SWITCH.
  4. Remove key light case from lock body, if equipped.
  5. On 1989 Accord models, place ignition lock cylinder in the ACC position.
  6. On except 1989 Accord, place ignition lock in the I position.
  7. On all models, position suitable punch into hole on lock cylinder housing and depress pin, then remove lock cylinder from housing.
INSTALLATION

  1. On 1989 Accord models, install ignition lock cylinder as follows:
    1. Place ignition lock cylinder in the LOCK position.
    2. Rotate key until it is almost at the ACC position, then insert lock cylinder until pin contacts housing.
    3. Rotate key to ACC position, then push pin in and insert lock cylinder into housing until pin clicks into place.
  1. On except 1989 Accord, install ignition lock cylinder as follows:
    1. Place ignition lock cylinder in the O position.
    2. Rotate key until it is almost at the I position, then insert lock cylinder until pin contacts housing.
    3. Rotate key to I position, then push pin in and insert lock cylinder into housing until pin clicks into place.
  1. Install ignition switch and connect battery ground cable.
SRS wire harness is routed near the ignition switch.

CAUTION:
  • All SRS electrical wiring harnesses are covered with yellow outer insulation.
  • Before disconnecting the SRS wire harness, install the short connector on the airbag.
  • Replace the entire affected SRS harness assembly if it has an open circuit or damaged wiring.
IGNITION SWITCH
  1. Remove the steering wheel, then remove the steering column covers.
  2. Disconnect the 7-P connector from the under-dash fuse box.
  3. Insert the key and turn it to "0."
  4. Remove the 2 screws and replace the base of the switch.

Feb 13, 2009 | 1992 Honda Accord

2 Answers

Maitneance required light


Hi.. after you do this step come back and rate as fixya. OK..

Turn the ignitio key to run position
Push and hold for 5 seconds the Trip reset botom.
With the botom pushed turn the ignition key to OFF position.
Keeping pushed the botom.
Turn the Ignition switch to RUN position. keep pushed the trip botom for 10 seconds or untill you see the MAINT_Requi. go OFF.

Remember all this steps with the trip botom pushed. OK.

I hope this solve your question. Thank you for use fixya.

Aug 01, 2008 | 1998 Honda Accord

2 Answers

1989 honda accord ignition


check neutral safty sw. battery cables dirty starter relay not working? _________________transspnder

Jul 05, 2008 | 1989 Honda Accord 4 Door

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...