Question about 2003 Lincoln Navigator

2 Answers

Serpentine belt how to install serpentine belt

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,498 Answers

This is for anybody who has had trouble getting a serpentine belt on. It's easy and doesn't require a prybar.

  • Get a 14mm or 9/16" socket and a long handled ratchet or breaker bar.
  • Get the belt around all the pulleys except the A/C compressor or Alternator.
  • The tensioner pulley is near the center of the engine. It's on a spring loaded arm. Get your socket on the center nut of this pulley.
  • Slowly pull the ratchet toward the center of the engine. The pulley will pivot on the arm allowing you to get the belt on the final pulley.
  • Slowly release the tension.
  • You're done
Mike

Posted on Oct 12, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 131 Answers

There should be a diagram located on your radiator cover. This shows how the belt is to be run. You will have a belt tension pulley. You will need to use a ½ inch drive breaker bar to relieve the tension from the belt.

Posted on Jul 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My vw beetle 2.0 2002 fan belt snap i dont have sample any one can help me with a size of the belt


The snapped belt has a number mark.

How To Install Replace Engine Serpentine Belt Volkswagen ...

? 6:09
https://www.youtube.com/watch?v=urBVruIk348
Dec 31, 2011 - Uploaded by 1A Auto Parts
How To Install Replace Engine Serpentine Belt Volkswagen Beetle 1AAuto.com ... Well, the serpentine belt on my Bugbroke. And, didnt know ...

Help! Serpentine belt broke, need advice. - TDIClub Forums

https://forums.tdiclub.com/showthread.php?t=323672
Jul 11, 2011 - Basically, I think the serpentine belt blew on her, she drove about 1/8 ...TDI(s): 2005 Passat Wagon, 2004 Jetta,99.5 Golf ... BTW, last year I lost my AC belt rather abruptly. .... 2005 VW Passat GLS TDI (Chipped, BSM delete, and Manual ), 2007 VW Eos 2.0T, 2002 Mazda MPV ES, 2015 Toyota Sienna XLE. 1.6 tdi alternator belt tensioner bolt snapped
Dec 29, 2013
Serpentine Belt Tensioner (A4 ALH) Keeps breaking!!!!!!
Jul 29, 2013
Serpentine belt tensioner?
Sep 17, 2012
ALH Serp. Tensioner Damper Failure w/ pics and video
May 21, 2011
More results from forums.tdiclub.com

VWVortex.com - Broken timing belt, valves likely bent

forums.vwvortex.com > ... > Golf IV & Jetta IV

Dec 19, 2015 | Cars & Trucks

1 Answer

Serpentine belt


Application:
With A/C


2.image

Kia_Sedona_2002-2006
Accessory Drive Belts

Print


Accessory Belt Routing



0996b43f802319a9.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Accessory serpentine belt routing-3.5L engine


0996b43f802319a9.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Accessory serpentine belt routing-3.5L engine


0996b43f8020700d.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Accessory serpentine belt (A) routing-3.8L engine


Inspection

Inspect the drive belt for signs of glazing or cracking. A glazed belt will be perfectly smooth from slippage, while a good belt will have a slight texture of fabric visible. Cracks will usually start at the inner edge of the belt and run outward. All worn or damaged drive belts should be replaced immediately.


Removal & Installation

  1. Disconnect the negative battery cable.
  2. Rotate the auto tensioner clockwise to release tension, then remove the drive belt.

To install:
  1. Install drive belt (A). Route the belt over the components in the following order: Crankshaft pulley - A/C pulley - idler pulley - generator pulley - water pump pulley - P/S pump pulley - tensioner pulley.
  2. Rotate auto tensioner arm in the counter-clockwise moving auto tensioner pulley bolt with wrench.
  3. After putting belt on auto tensioner pulley, release the auto tensioner pulley slowly.

    0996b43f802319a9.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Accessory serpentine belt routing-3.5L engine


    0996b43f8020700d.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Accessory serpentine belt (A) routing-3.8L engine


May 09, 2012 | 2006 Kia Sedona 3.8

2 Answers

How to put serpentine belt on a 2004 taurus. instruction & diagram


The 8th digit of your car's VIN (vehicle identification number) tells you the engine
type for your car - your choices for Ford Taurus are U (3.0L), and S (3.0L).
I've included the Ford SHO engine too.



archaeology_38.jpg
Serpentine belt for 3.0L (Vin U) Ford Taurus

archaeology_39.jpg
Serpentine belt for 3.0L (Vin S) Ford Taurus

archaeology_40.jpg
Serpentine Belt for Ford 3.4L SHO engine

archaeology_41.jpg
Water Pump belt for Ford 3.4L SHO engine

REMOVAL AND INSTALLATION
  1. Attach a 15mm socket or wrench to the bolt attaching the tensioner pulley.
  2. On all 3.0L (OHV) engines, rotate the drive belt tensioner clockwise to relieve belt tension and slide the belt off the pulleys.
  3. On 3.0L (DOHC) engines, rotate the tensioner counterclockwise to relieve belt tension and slide the belt off the pulleys.


To install:
  1. Install the drive belt on all the pulleys except the tensioner pulley.
  2. Rotate the belt tensioner as outlined in the removal procedure to relieve belt tension and install the belt onto the tensioner pulley. Make sure the V-grooves make proper contact with the pulleys. Make sure the spring keeper releases or improper belt tension will occur.
Tip: you may want to get (free) a serpentine belt installation tool kit to help with this job.
Both Advance Auto Parts and AutoZone wisely have loan-a-tool programs that permit you
to borrow (for a deposit) their serpentine belt installation kits - which allow their
handy customers to use their auto parts rather than towing it to a garage.

Apr 11, 2011 | Ford Taurus Cars & Trucks

1 Answer

I have a 1990 supreme cutlass and i don't know how to change the serpentine belt. What do I do?



2.8L and 3.1L Air Pump Belt

  1. Disconnect the negative battery cable.
  2. Loosen the air pump.
  3. Remove the worn belt.

To install:
  1. Adjust the belt to specifications and tighten the pump mounting bolts.
  2. Connect the negative battery cable.

2.3L Power Steering Belt
  1. Disconnect the negative battery cable.
  2. Loosen the adjustment bolts.
  3. Remove the power steering belt from the pulley.

To install:
  1. Route the belt around the pulley.
  2. Adjust the belt to specifications, then tighten the adjustment bolts.
  3. Connect the negative battery cable.

See Figures 6 through 15

0900c15280067989.jpg

Fig. Fig. 6: Unfasten the retaining bolts...


0900c1528006798a.jpg

Fig. Fig. 7: ... then remove the serpentine belt guard


0900c1528006798b.jpg

Fig. Fig. 8: ...


0900c1528006798c.jpg

Fig. Fig. 9: ... then remove the serpentine belt

  1. Remove the belt. Clean the accessory drive belt surfaces.



0900c1528006798d.jpg

Fig. Fig. 10: Serpentine drive belt routing-2.2L engine


0900c1528006798e.jpg

Fig. Fig. 11: Removal and installation of the serpentine belt-2.3L engine


0900c1528006798f.jpg

Fig. Fig. 12: Serpentine belt routing-2.5L engine with and without A/C


0900c15280067990.jpg

Fig. Fig. 13: Use an 18mm box end wrench on the pulley nut to rotate the tensioner on the 3.8L engine


0900c15280067991.jpg

Fig. Fig. 14: in. breaker bar to rotate the tensioner


0900c15280067992.jpg

Fig. Fig. 15: On the 3.4L, use a box end wrench, then rotate the tensioner clockwise and remove the serpentine belt

Remove the belt guard or coolant recovery reservoir as required.



Dec 31, 2010 | 1994 Oldsmobile Cutlass Supreme

1 Answer

Serpentine belt broke on 87 ford econo van


ps...you do not have to Post another Question....just Add a Comment to this question.

"HOW TO": I professionally prefer the Serpentine Tensioner Tool.
Standard Rules to Removal the Serpentine Belt with an Automatic Tensioner:
1. Find the Tensioner(s).
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (located on the Tensioner Pulley rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.
4. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

Standard Rules for Installing the Serpentine Belt with an Automatic Tensioner:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley and Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.

Apr 15, 2010 | 1987 Ford Econoline

1 Answer

Need diagram for serpentine belt


2004 SUZUKI FORENZA - L4 2.0L 2000cc GAS FI N

Adjustment

The belt is automatically adjusted by the auto tensioner.


Drive Belt Routings

47cc840.jpg

Fig. Accessory drive belt routing-2.0L engine



Removal & Installation
  1. Remove the air filter housing assembly bolts and the air intake tube.
  2. Remove the air filter housing assembly from the vehicle.
  3. Use a wrench to turn the tensioner bolt clockwise, compressing the tensioner, and releasing the tension on the serpentine accessory drive belt.
  4. Remove the serpentine accessory drive belt.
To install:
  1. Use a wrench to turn the tensioner bolt clockwise, compressing the tensioner, and releasing the tension on the serpentine accessory drive belt.
  2. With the wrench in place on the tensioner bolt, loop the serpentine accessory drive belt loosely over the pulleys.
  3. Slip the belt over the tensioner.
  4. Remove the wrench from the tensioner bolt and the belt will tighten itself.
  5. Install the air filter housing assembly into the vehicle.
  6. Install the air intake tube and the air filter housing assembly bolts.
  7. Tighten the air filter housing assembly bolts to 53 inch lbs. and nm
I really hope helped with this. remember rated this help. Good luck.


Nov 12, 2009 | 2004 Suzuki Forenza

3 Answers

NEED DIAGRAM FOR ROUTING THE SERPENTINE BELT


PLEASE DON'T FORGET TO RATE--You didn't post the size of motor so please pick the applicable one:

e8f5627.gif
Accessory serpentine belt routing—4.8L, 5.3L and 6.0L engines

793398d.gif
Accessory serpentine belt routing—4.3L, 5.0L and 5.7L engines without A/C

b701ba4.gif
Accessory serpentine belt routing—4.3L, 5.0L and 5.7L engines with A/C

a8d5a93.gif
Accessory serpentine belt routing—6.5L Diesel engines

7f5d3cb.gif
Accessory serpentine belt routing—7.4L engine

10dba31.gif
Accessory serpentine belt routing—8.1L engine

Oct 22, 2009 | 2004 Chevrolet Express

1 Answer

How to install serpentine belt on 1996 dodge caravan se


Good morning! I am enclosing a serpentine belt routing diagram to aid in the installation of your serpentine belt. There are 4 different engine possibilities but i have enclosed all. The serpentine belt tensioner is released by rotating in a clockwise direction as shown in the diagrams. Engine configuration will determine what tools you need but the installation is relatively easy to do. Have a great day!4c86670.gif8f5ea2e.gif68b7bf5.gif

Oct 04, 2009 | 1996 Dodge Caravan

1 Answer

'93 Mercury Sable Serpentine Belt installation without using AC


You need to have an automotive technitian install a new belt because there is a certain path the belt must follow before it will go on, plus the belt must go around the A/c as it is part of the path. You just don't have to use the A/C.

Tell the tech that the belt broke so that he can look for a reason as to why the belt broke.
Bill

Nov 19, 2008 | 1993 Mercury Sable

Not finding what you are looking for?
2003 Lincoln Navigator Logo

739 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...