I actually removed my 2 front seats very easily as a novice. There really is only i think 4 bolts that need to come out 2 in front and 2 in back. If i can remember correctly i believe it was a larger metric size. Although i dont have power seats, if you do just look for the clip connector and disengage
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This device is also called FLASHER; on 1995 Jeep Grand Cherokee, the flasher is located according with the application: - Hazard flasher: front seating area, driver side, under dash, driver side of steering column, mounted in convenience center - Turn signal: front seating area, driver side, under dash, driver side of steering column, mounted in convenience center
If you are interesting in some specific section additional details, this could find in the Jeep Repair Manual.
Hope this helps; also keep in mind that your feedback is important and I'll appreciate
your time and consideration if you leave some testimonial comment about
Pop the hood and look at the top of the headlight capsule. you should see a single 7mm bolt somewhere in the middle. remove the bolt completely it should be about 6 inches long. once the bolt is removed then use a large flat screwdriver and carefully pry the headlight capsule out from it retaing clips. once the capsule is out then you have 100% access to the bulbs