The fog lights and the headlights work together. the fog light switch is in the on off switch for the headlights push the knob would be pulled out for your fog lights and pushed in for your headlights and just turn to on position
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If your horn is not working, check the horn relay before anything else. Press the horn actuator on the steering wheel, and have someone listing within the engine compartment for a distinct 'clicking.' If you hear it, then it's working and the horn component itself may be malfunctioning. The horn looks like a square-mouthed snail shell and should be just behind the front bumper skirt on the driver's side. More or less beside the fog light assembly.
Check on line as well for the replacement...use search engine...2005 Ford Focus Fog Light...also your local salvage yard might have it for less...this should be a plug in unit...so no wiring concerns...Hope this helps.
The fog lights on most vehicles sit directly underneath the headlight bulbs. The ballast and wiring work just like the headlights, so changing them takes not much time. The procedure to change the fog light is as follows:--1) Open the hood and reach down underneath the headlights to unplug the electrical plug from the fog light assembly. Squeeze the top of the release tab and pull the connection off the bulb's ballast.2)Turn the fog light counterclockwise to remove it from the fog light housing.3)Install the new fog light bulb.Then connect electrical plugs properly.4) Test the fog lights by turning it ON.Thanks. you can rate this solution and show your appreciation.
ARE YOU READY
L.H. STOP AND TURN ( YELLOW )
R.H. STOP AND TURN ( GREEN )
TAIL, LICENSE, SIDE MARKERS ( BROWN )
GROUND ( WHITE )
NOW THE COLORS ON THE VEHICAL ARE GOING TO BE DIFFERENT AND YOU WILL NEED A 12 VOLT TEST LIGHT FOR MAKEING SURE YOU HAVE THE WRITE WIRES FROM THE CAR TO THE TOE BAR, DON'T NEED BACK UP TIGHTS FOR THIS
hi from uk the fog lghts? i assume front fog lamps ? the head lights have to be on dipped beam then the fogs will also work but in uk this is so as to prevent fogs only being used (blinding oncoming traffic ) if weather conditions req fogs to be used for poor visibility ? then the side/tail and h/lights must also be on like wise the rear fog light/s operate the same way hope this helps and makes perfect sense ?? all above is assuming bulbs have been checked and fuse/relay and power to each lamp ?