Question about 2000 Chevrolet Impala

1 Answer

Replacing driver side door

Can the driver side door be easily replaced with out going to a shop; if so can someone do a you tube video? Thanks

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert that hasĀ over 500 points.


    An expert who has answered 200 questions.

  • Expert
  • 334 Answers

If you take the hinge pins out of both doors and use a jack to hold the door in place its not too bad. just slide the door up to the car and slide in the pins. But just remember to replace the door bushings before you do because it saves you the trouble before hand.
if you have electric windows you probably need to take door panel off and unplug them first.

Posted on Jan 04, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Directional signal clicker is barely audible. Can this be replaced easily?

Well, that depends, Usually it is your relay in the fuse panel located just inside the driver-side door that needs replacing. (Open the door, look at the side of the dashboard, pull cover off panel, flasher relay is marked as such.) However, there may be a more complicated problem that requires pulling the turn signal handle out of the column. This requires being a very flexible person because the screws are in the underside. I recommend checking the relay first. If it is more complex, check UTube videos for Ford truck turn signal problems.

Apr 26, 2015 | 1996 Ford F150 Regular Cab

1 Answer

Drivers side window won't roll up or down but can roll passenger side and back windows up and down

It s probable the window switch, especially on driver's side because its the one that's used the most. Switch replace involves removing door card and minor mechanics under it. U-tube has a video on the subject, if you're not up to repair, contact local repair shop or dealer.

Dec 05, 2014 | 2009 Dodge Journey

1 Answer

2002 Chevy Tracker ZR2 (small suv) outside, left, drivers door handle broke

You should have someone experienced with you to do this type of job, due to the complex series of tasks involved

Mar 04, 2013 | Cars & Trucks

1 Answer

Replace computer box

I would Google to begin with the year and model with "replace" and also look on You Tube or one of the many Toyota forums to see if video or detailed instructions exist from someone who has already done this--recently had a bad hinge pin on door of a vehicle--got everything from remove entire door, replace entire hinge to someone with step by step instructions with photos--20 min job and 2 4 dollar parts.

You can save time and mistakes if you research enough. Key words are essential when you do this.

Nov 06, 2012 | 1996 Toyota Tacoma

2 Answers

Can an Evaporator Drain be repair if it's cracked?

ok first i would call the shop that just did the work odds are the drain tube is out of position when they reassembled the evap box

Aug 09, 2012 | 2007 Mitsubishi Galant ES

1 Answer

Replacing a window motor on driver side door

the car is 12, put a whole new regulator in it, not just a motor. these can be had at parts stores and ebay for less than a hundred bucks. pay an autoglass shop to put it in, much easier when you have the knowledge, tools, and fasteners at hand. if you want to skin your knuckles and spend a day driving around to find the fasteners there are videos of folks replacing these on once you have done one yourself you will gladly pay someone 50 bucks to do it the next time.

Dec 21, 2010 | 1998 Buick Century

1 Answer

My car alarm keeps going off, I made sure all the doors are shut properly and all the windows are closed. What else can I do to make it stop? '99 ford escort

Depends. If it is an aftermarket alarm that didn't come with the car those are easily removed by undoing the wiring for the alarm box usually underneath the steering column. If you're not comfortable with wiring issues, a local shop should be able to do it for around 70 dollars, one hour labor. Factory alarms are different. There are door switches that regularly go bad for your car that can usually be determined if when all your doors are closed the dome light stays on or comes on. There should also be an indicator on the instrument cluster. Usually it's the driver's door(most used) that goes bad. If this malfunctions while the vehicle alarm has been set the antitheft system will think someone opened the door without unlocking it. Replacing these switches usually require removal of the door latch on the inside of the door panel. Sometimes spraying lubricant through the keyhole will help these switches work... for a while. And if all else fails, you can always unplug the horn... Good luck!

Nov 17, 2010 | 1999 Ford Escort

1 Answer

Replacing a relay switch for drivers side window

The problem is usually the door switch. Go on ebay and match your part with one there and replace it. Cheap fix.

Jul 15, 2009 | 2002 Pontiac Sunfire

1 Answer

Driver side window inching up to close and completely stuck now

just remove the door panel its pretty simple once you are in door panel you will see the motor.the door panel is held on by either screws or plastic push ins..there little plastiv pins that expand after they are in hole

Jun 17, 2009 | 2000 Toyota Sienna

3 Answers

94 chevy s10 blazer power windows not working

I had the same problem - driver side fine, passenger side front not working/slow or the back seat. You need to replace the window motor on the passenger side. Yes, there are two motors. It's pretty simple if you are handy with some tools. The hardest part is getting the 4 mounts that hold the window motor to the door off. The are factory riveted to the door, so I had to grind the outsides off and tap them out. Just watch the spring lever that holds the window bar for going up and down. I didn't pay attention and it snapped back - nearly broke my thumb.


Feb 28, 2009 | 1994 Chevrolet S-10

Not finding what you are looking for?
2000 Chevrolet Impala Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides