Question about 1992 Mazda 626

1 Answer

Engine problem - 1992 Mazda 626 (V6)

My Mazda 626 had done about 220,000 k's. When the car has warmed up, and under load or I try to accelerate quickly, the engine seems to rapidly loose power (almost like it is changing gears) + puff and splatters. It has now also started to overheat under load. I presume it needs an engine rebuild? I have a reasonable understanding of cars and worked on them back in my early days, so is there a step by step manual (I can purchase) to repair this? If so, how much do you think this will cost + what would you estimate the parts to costs?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 125 Answers

Yes you can purchase a repair manual online if you like from this site, or local parts stores they run about $25.00 or so, and might consider either purchasing a OBDI diagnositc scanner or take it to a shop to save guess work. You can perform several tests to check properly such as compression test wet and dry or simple spark test, fuel pressure test and so forth all of the tests can be found in repair manual.

Posted on Jan 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

92 626 ticking


is the tick relative to engine speed or road speed, engine speed could be a cracked exhaust. road speed could be a faulty CV Joint, this should change when turning steering lock to lock

Nov 26, 2013 | 1992 Mazda 626

1 Answer

1992 mazda 626 hesitates on acceleration what's


Sounds like a weak fuel pump.Check your fuel pressure it should be 34-40 with key on engine off.

Jan 25, 2012 | 1992 Mazda 626

1 Answer

Mazda 626 v6 1992 wont start


Replace the ignition coiil located inside the distributor

Jan 21, 2012 | 1992 Mazda 626

1 Answer

Mazda 626 92 v6- engine sputters when revved over 4000rpm and cuts out completly for about 2 seconds when you turn left a bit too fast


Sounds like fuel starvation. You don't say if it is carb or injectors, but sounds like carb. Check the fuel filter, the float level and needle and seat and the main jets for partial blockage. Yu can also check the fuel pump delivery and pressure and the vapour separator.

Mar 27, 2011 | 1992 Mazda 626

3 Answers

Are your cams in correct time as long as the timing marks on the cam drive gears are aligned and your motor is at tdc on the compression stroke?2002 Mazda 626 v6.


as long as it looks like this...

365f2b7.gif


however, this only give you base engine timing

ignition timing is done with sensors and computers

Jun 09, 2010 | 2002 Mazda 626

2 Answers

What motor does it have


It could have a 4 Cyl 2.0 liter or a 6 Cylinder V6 2.5 liter. I'm sure anyone that looks under the hood could tell you.

Dec 14, 2009 | 1996 Mazda 626

1 Answer

Under steady acceleration, engine light goes on


Being a 95 it dosent have OBD2 so it may not store a trouble code in the computer.
From the symptoms it sounds like either, Air flow sensor, O2 sensor
The O2 will not usually cause stalling under acceleration.

Sep 30, 2009 | 1995 Mazda 626

1 Answer

1992 mazda mx6 idle issue


check all the small rubber vacuum pipes for any splits, cracks or deterioration etc, also check that their connections are clean & tight.

May 18, 2008 | 1992 Mazda 626

Not finding what you are looking for?
1992 Mazda 626 Logo

Related Topics:

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

61292 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...