Question about 1995 Chevrolet Blazer

1 Answer

Chevy 95 Blazer

When starting it sounds like it wants to flood before starting, change plugs and there is a silver tab thing on the side of the motor which was connectted to a USB type plug what is this.

Posted by on

1 Answer

Its a sensor

Posted on Jul 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is relay on 95 chevy blazer wiper motor


I had to change my wiper motor on my 97 blazer. The relay should be in the fuse box, that is under the hood.

Feb 02, 2013 | 1997 Chevrolet Blazer

1 Answer

I have a 96 chevy blazer that will start up and run fine. After I park it, it does not want to start back up.


It sounds like the solenoid on your starter motor replace it and it should be fine. I hope this helps.

Aug 25, 2012 | 1996 Chevrolet Blazer

1 Answer

My wife's 95 blazer with the 4.3 vortec is having


I can be problem with IAC valve or motor,or there can be vacuum leak issue it its dirty Idle control valve or problem with dirt build up in throttle body.Click this link below and follow step by step troubleshooting:-----http://whatisbyme.blogspot.in/2012/05/high-idle-on-chevy-blazer.html
---------------this should help.Thanks.

May 15, 2012 | 1995 Chevrolet Blazer

1 Answer

1999 chevy blazer not starting


Check the plug wire from the ignition coil to the distributor cap.
If you haven't already, replace the distributor cap and rotor.
The GM Vortec's have issues with moisture getting inside the cap and rotor and causing problems.

Apr 24, 2012 | 1999 Chevrolet Blazer

2 Answers

My 1998 Chevy Blazer crank excessively when I try to start it. It always starts, and runs good when I get it started, but I would really like a smooth start. I have recently changed the fuel filter, spark...


leaky injector/s is flooding motor, mechanically clean or replace. And clean throttle body while you are at it with spray cleaner. Should be almost spotless where large throttle valve opens and closes.

Oct 21, 2010 | 1998 Chevrolet Blazer

2 Answers

I need the firing order for a 93 chevy blazer distributor.where is number 1?


Firing order for a 4.3 liter v6 1-6-5-4-3-2

#1 piston is the first spark plug drivers side front of engine.
Passenger side cylinders are 2 4 6
Drivers side cylinders are 1 3 5
Distributor rotates clockwise and the starting spot is marked with a 1 on the top of the distributor cap.
Make sure you note the position of the 1 on the old cap before you take it off so you don't rotate the new one 180 out

Jun 09, 2010 | 1993 Chevrolet S-10 Blazer

1 Answer

Starts and runs rough with black smoke as flooded


when you replaced the plugs/wires. Did you do the cap and rotor too
Also have your timing checked

Jul 10, 2009 | 1988 Chevrolet Blazer

2 Answers

Engine swap


95-94-93 4.3 vortec are compatable engines. 97 4.3 will fit but will have problems with sensors and computer

Dec 06, 2008 | 1995 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...