Question about 1999 Chevrolet Lumina

2 Answers

Directional Lights My turning signals have just stopped working. I flip the switch and nothing happens --no clicking, no light--. At first they were just bing temperalmental but now I get nothing. What is wrong what should I do?

Posted by on

  • timbackes Aug 09, 2008

    1997 lumina: turn indicators do not work. All bulbs have been tested and replaced if necessary. I have checked the fuses, but cannot find a relay specifically for the indicators.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Are both left and right turn signals not working? If only one side fails to work, the problem may simply be a blown (exterior turn signal) bulb.

Posted on Aug 04, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 131 Answers

First check the fuse, then the flasher. If it still doesn’t work you will check the relay. Finely and more difficult is the turn signal switch. This involves removing the steering wheel.

Posted on Jul 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tail Light/When I BRAKE The left Directional STOPS


Ernest, a lot of the time when this happens it is telling you the bulb burnt out or wire/socket is faulty(bulbs can look OK so it is best to test them if you can). Check/clean for corroded ground wires in that area also. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Turn Signal Stops Blinking When Brakes Are Applied
https://answers.yahoo.com/question/index?qid=20121108164813AAvTI9H
left turn signal stops flashing when brake lights on NAXJA Forums North...
Diagnose The Turn Signals Dont Work Or Dont Work Properly Auto Repair Help

Aug 21, 2016 | Cars & Trucks

1 Answer

The directional lights on my TT stopped working this week. The lights will flash once and then stop. Anyone have a clue why this would happen?


The hazard switches on some Audi models includes a relay for the turn signals. This was true on my Allroad and A6, but I haven't needed to replace on my TT yet. Part is easy to replace, but about 50 to 75 dollars.

Sep 28, 2013 | Audi TT Cars & Trucks

1 Answer

All 4 turn signals dont work


there should be a fuse for the direction light. and a direction switch can be bad and still click and operate as it suppose to

Dec 21, 2012 | 1997 Geo Metro

1 Answer

Hyundai Sonata 2004 turn signal does not work properly


did you check the directional switch. sounds like you have a bad one

Nov 07, 2012 | Hyundai Sonata Cars & Trucks

1 Answer

My turn signals on my 1988 Jeep Comanche dont work.


My first guess would have been the turn signal switch, which you said you replaced.
You'll have to get a wiring diagram of the switch and start testing wires for power out of the switch. Could be a problem with the main harness going back to the rear of the truck, or a ground for those sockets.

Oct 12, 2012 | 1988 Jeep Comanche

1 Answer

Impala 2000 directional lights(turn signal) isn't working


Try turning the flashers on and off repeatedly. If this make the turn signals work the switch is bad.Call a dealer and ask about a recall I had an 2002 doing the same thing and the dealer fixed it for free. Not sure how many years they had this problem Good luck

Mar 07, 2009 | 2000 Chevrolet Impala

3 Answers

Turn Signals/blinkers


Did you double-check to be sure the fuses are intact and not blown? If they are OK, it could be a turn signal relay or the switch itself (I have firsthand experience with the switch failing with respect to headlight operation, so there's no reason to believe that it couldn't fail for turn signal operation as well).

If you find that it's the switch, reply here and I can walk you through its replacement - it's about a five minute job.

Aug 10, 2008 | 1992 Honda Accord

1 Answer

1998 monte carlo brake lights will not work. Directional light ok and middle rear window brke lights work. Stop light fuse ok.


I have the same problem,it's the switch inside the turn signal assembly.Unfortunately the entire assembly switch and all has to be replaced.
Hope this helps.

Jul 15, 2008 | Chevrolet Monte Carlo Cars & Trucks

Not finding what you are looking for?
1999 Chevrolet Lumina Logo

Related Topics:

224 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...