Question about 2004 GMC Yukon

1 Answer

2004 Yukon windshied wipers wont turn off

I have a 2004 yukon that when I turn on the windshield wipers they will not shut off. After the car sits a while I can start it and they will shut off. Very frustrating

Posted by on

  • FletcherRanie Townsend
    FletcherRanie Townsend Jul 11, 2008

    Thanks for the help. It Took me a while to change the motor with my mechanical experence. I bought a 63 dollar reconditioned motor from advance and every thing works great. Thanks againn for the help! Fletcher3947



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • GMC Master
  • 2,039 Answers

Change our wiper motor the circuit inside of the motor dont trasfer the power to therminate the cycle hope it FIXYA our problem thanks pierre

Posted on Jul 05, 2008

  • pierre laplante Jul 11, 2008

    very glad to help you dont hesitate to post thanks pierre



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the wiper motor on my 1999 GMC Yukon?

Windshield Wiper Motor
Removal & Installation
To Remove:

  1. Remove wiper arms.
  2. Remove weatherstrip from cowl.
  3. Remove two cowl vent grille panel screws.
  4. Remove windshield nozzles and hoses.
  5. Remove three cowl vent grille panels.
  6. Disconnect windshield wiper motor electrical connector.
    NOTE: Do not remove crank arm from windshield wiper motor.

  7. Loosen nuts that attach the drive link brackets to the crank arm.
  8. Remove wiper motor crank arm brackets.


  9. Remove three bolts and windshield wiper motor from vehicle.

To Install:

  1. Install windshield wiper motor and three bolts.

    • Torque to: 62 in lbs. (7 Nm)

  2. With right side linkage closest to the windshield wiper motor, install drive
    link brackets to wiper motor crank arm.

    • Torque nuts to: 44 in lbs. (5 Nm)

  3. Connect electrical connector.
  4. Install nozzles and windshield washer hoses to cowl vent grille.
  5. Install three cowl vent grille panels and screws to vehicle.
  6. Install weatherstrip to cowl.
  7. Install wiper arms.

prev.gif next.gif

Oct 30, 2010 | 1999 GMC Yukon

1 Answer

2003 Yukon, Windshield wipers will not cut off

Go to it is free as long as you click on 2 of the ads at the website then your questions will be answered by an ASE certified mechanic,you don't have to buy or fill out anything on the ads,so help keep the site free.

Apr 13, 2010 | 2003 GMC Yukon

1 Answer

Drivers side wiper arm seems to be making poor contact with the windshield. Is there an adjustment?

All you have to do is .... slighty bend the arm inward, and you should be fine...Not too much, then it will have too much pressure on the windshield, but just enough, where, when you turn your wipers on, with the washer fluid running, it seems fine... Goodluck

Dec 15, 2009 | 2004 GMC Yukon

1 Answer

Wipers come on when blinker is turned on and won't go off


I think it's a problem with the wiring harness. Probably have a short somewhere.
In reality, things like this, with american cars, it's pretty normal.

I had a ford taurus once.... it was full of electrical and mechanical faults.

Consult a dealership, they could do some troubleshooting.

Jul 14, 2009 | 1999 GMC Yukon

2 Answers

Trouble replacing wiper blades on 2004 GMC Yukon

hi from uk re wiper blade you only have to swivel blade enough to access the press clip that holds the swivel mount of the blade then while pressing clip pull wiper blade down out of the wiper arm U type hook replacement is in reverse make sure you note the old blade fits so you fit new one same way ?

Mar 27, 2009 | 2004 GMC Yukon

1 Answer

Windshield wiper arm

These are a tight fit...Spray a little penetrating lubricant onto it and let it sit for about 20 minutes. You will notice there are splines that match up from the drive unit to the base of the wiper arm...sometimes these can get a little corroded and becasue of the relative surface area it makes them a real pain to get off. You may need to just pry against it gently with a flat head scredriver after you spray on the lubricant. Pray at it from all different sides of the base so that it doesn't bind up and get crooked.

Hope this helps! Good Luck!

Feb 12, 2009 | 2002 GMC Yukon XL

1 Answer

Windshield wipers work very little only on high when they do

Check first for a Fuse that Has Blown. This is a Major Problem on the Chevy Trucks and there rally is not a Reason for it. Sometimes a Motor will work and Sometimes it will not. On My 95' Silverado SS 350 I had to go through 5 Motors before I found one that She Liked! That was 7 Years ago, It is Still workin!. Please Rate my Response, I need all the Help That I can Get! Thanks!

Jan 27, 2009 | 2004 GMC Yukon

1 Answer

Windshield Wiper motor replaced, now wipers go wrong direction

This sounds like the park circuit is shorted.

Nov 25, 2008 | 1999 GMC Yukon

1 Answer

99 Yukon windshield wipers sometimes won t turn on and other time stop after working

We had the same problem and sometimes they wouldn't turn off. The intermittent wipers were random. We replaced the wiper motor. Be sure to get the motor with two balls on the wiper shaft (one for each wiper arm). If you can't find it, you'll have to change the part out on the new motor. Keep the wiper arms in the same location on removal, or it will jam and you'll have to start over.

Jul 14, 2008 | 1999 GMC Yukon

Not finding what you are looking for?
2004 GMC Yukon Logo

701 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides