Question about 2007 Pontiac G6 GT Convertible

1 Answer

Engine stalls with A/C running and making a hard turn, engine stalls out

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 362 Answers

The AC running and the power steering running hard is overloading the engine. one of them could be failing. you should be under warranty, you should also check for recalls on your model. but go to the dealer and let warranty handle it.

Posted on Jul 05, 2008

2 Suggested Answers

emissionwiz
  • 64034 Answers

SOURCE: 2004 Envoy xl stalls when making turns

this is caused by slow engine idle speed, do the procedure below.
Here is the common cause of surges, stalls at stops, slow idle speed, erratic idle speed, rough idle and engine hesitation (and other problems), it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.



Posted on Jun 16, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hard starting, stalling


Check the fuel pressure, make sure it doesn't bleed down after the car sits, that causing long crank times/hard starting.

May 06, 2016 | 1996 Nissan Quest

1 Answer

Running rough& stalling


Brenda, this could be a lot of different things to cause hard start and stalling. Faulty crank sensor, idle air control valve, EGR, vacuum leak, injectors, fuel pump, ignition circuit, distributor faulty,plugs,wires,plugged exhaust, etc. Find a good technician check the codes and have them diagnose and give an estimate on repair. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info.
No Start Engine Stalls Mercury Villager Common Engine Problems
Nissan Quest Mercury Villager Starting Stalling Problems
http://forums.nicoclub.com/1996-nissan-altima-runs-rough-and-stalls-t162761.html

May 06, 2016 | Cars & Trucks

2 Answers

89 ford probe hesitates when leaving a red light, then runs fine otherwise, fuel filter?


Engine Runs Rough, Stalls, Hesitates on Acceleration, Hard ...

repairpal.com > Problems > Ford > Probe
Ford Probe Engine Runs Rough, Stalls, Hesitates on Acceleration, Hard Starting, Poor Performance. This is a verified problem based on 9 reports. Learn more ...

Starting Problems - 1997 Ford Probe - RepairPal

repairpal.com > Questions > Ford > Probe > 1997 Ford Probe
Dec 5, 2010 - Starting Problems on 1997 Ford Probe ... If the engine runs rough,stalls, hesitates on acceleration, is hard to start, or has generally poor ...

A new misfire/hesitation on accel. Problem.. - ProbeTalk.com Forums

forums.probetalk.com > Tech Section > 2nd Gen (93-97) V6 2.5L

Feb 05, 2016 | Ford Cars & Trucks

1 Answer

Car wont stay running unless foot is on the gas pedal


is the CEL check engine light out running? (it comes on stalled, and is normal that)
stalled. engine stall. no year, now that makes this 10x impossible
and even more impossible no engine stated, (displacement or VIN)
F22? 2.3. 2.7? 3.0L?
if in usa, (no loctation stated ) open hood, look up, see tag?
see vacuum EPA map, see engine type? bingo.

so I wall answer in the generic, (ALL CARS gasoline)
fails hot or cold engine, does hot engine reach 180F and hold?
wow, how low was the oil, off end of stick, none?
stalling is caused by over 50+ things. (we do tests to find it fast )
we use tools, do you have tools, or can buy them, or do you just want
endless guessing. here is the path.
#1 stall maker is a stuck open EGR main valve, ignored during the turn up, clean it. make sure it close
in the macro,
1: bad engine, the hot engine can lose compression and stall.
tool1 the $20buck compression guage.
2: bad spark, or timed wrong. gapped plugs wrong, wrong plugs used. bad wires sets, (old dizzy engines) bad COPS newer cars.
check for hot spark at all spark plugs, skip none.
3: bad fueling (too much or not enough
if engine runs perfect and only idle is too low 800 hot is normal
no DTC 300s misfires, then maybe the ISC is just dirty.
we clean the EGR and ISC every time.
if the EGR leaks, the fast right foot can save a stall but is hard.
if the ISC sticks closed, saving the stall is piece of cake, super easy
after all , you are adding the missing air.

does that help,. no, then take it top the man, the ASE man.
The Mechanic.with the ASE patch on his /her sleeve.
no year, ouch.

Dec 02, 2013 | Honda Accord Cars & Trucks

1 Answer

Engine stalls ,hard to startrun rough


Service Engine light came on and stays on and this is on my 1995 Grand Marquis LS 4.6 litre Engine. It is now idling a little rough

Sep 09, 2009 | Mercury Grand Marquis Cars & Trucks

1 Answer

1986 S-10 stalls when making left turns only.


seems like you got the problem solved. could be a power steering problem. maybe the engine belt is too slack. tighten the belts. check all the belts. if power steering belt is slack and you turn the wheel should get hard and the vehicle shuts off.

Jul 07, 2009 | 1996 Chevrolet Blazer

3 Answers

2004 Envoy xl stalls when making turns


this is caused by slow engine idle speed, do the procedure below.
Here is the common cause of surges, stalls at stops, slow idle speed, erratic idle speed, rough idle and engine hesitation (and other problems), it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.



Jun 16, 2009 | 2004 GMC Envoy

1 Answer

Running on lpg then stop turn engine off then start engine and drive 20 metres and engine stalls! switch over to petrol and runs ok switch back to lpg and stalls


check that your cooling system if full of coolant. the coolant that keeps the engine cool actually keeps the gas converter from freezing. alternatively is it hard to start of a morning when cold, if so could be butane wax build up from the gas, in the convertor.

Jun 22, 2008 | 2007 Toyota Land Cruiser

Not finding what you are looking for?
2007 Pontiac G6 GT Convertible Logo

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...