Question about 1996 GMC Sonoma

1 Answer

Door locks and ignition issue

Hi, my 96 GMC Sonoma won't start when the door locks don't engage. I don't have power windows or anything like that. Any help you can give would be much appreciated.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Sounds like it may be in the computer i have a 1994 and have never had that problem hope that helps

Posted on Dec 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 gmc 1500 350 5.7 new fuel pump and filter it cranks over but wont start


Kelly, could be a few issues, security lock out, crank sensor, fuel pump fuse/relay, faulty new pump,faulty ignition switch, etc. Attached links may help you diagnose the crank no start issue you are having.
Check the attached links,video,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
96 98 Chevy pickup cranks but won start first steps
GM no start no fuel troubleshooting
No Start No Spark Cranks OK GMC Jimmy S10 Blazer


Apr 24, 2016 | GMC Cars & Trucks

Tip

How To Install Replace Power Window and Door Lock Switch GMC Sonoma 01-04...


How To Install Replace Power Window and Door Lock Switch GMC Sonoma 01-04 1AAuto.com


on Feb 24, 2012 | 1999 GMC Sonoma

1 Answer

1996 GMC Sonoma SLS 2.2 litre engine starts missing and looses massive power going up hill


This can be caused by anything limiting fuel pressure or ignition spark. Tune up items, bad coil/module, bad fuel pump, filter, relay, bad converter, muffler, dirty air filter, vacuum leak, EGR, or others.

Oct 11, 2014 | 1996 GMC Sonoma

1 Answer

I have a 1993 gmc sonoma, put a new ecm in it but it willn't tern over,lights will com on tho an if i cros the starter the plugs wont fiyer


The problem is in the start circuit if the starter won't engage from the key. From battery to ignition switch to neutral park safety switch to starter relay to starter solenoid to starter to ground and back to battery-lights come on so switch is good, next check the neutral safety switch for power in and power out.
Once you get the start circuit working so starter engages from the key, then you can address the ignition circuit for possible no spark.

Oct 15, 2013 | 1993 GMC Sonoma Club

1 Answer

My 96 GMC Sonoma pickup is running, but only 30 mph what could be wrong? I have changed the fuel filter


Bad egr valve? Ignition coil/distributor/ignition wires/spark plugs? How many miles on it?

Sep 02, 2013 | 1996 GMC Sonoma

1 Answer

Gmc sonama replaced ignition switch now wont start


Yes, if you did not have a key made to fit the new lock that matches the old chip.

Jul 03, 2013 | 1996 GMC Sonoma

1 Answer

My 96 Toyota Camrys windows don't go down or the


You need to see a wiring diagram to see how the ignition switch allows or sends power to that 30 amp fuse. The switch may turn on a relay (maybe the ignition relay) that sends power to the fuse panel. Or the run wire out of the switch may itself turn power on at the fuses. You may have a loose connection behind the fuse panel.
Get a test light, pull the fuse, and check for power at the fuse terminals, with key on. One terminal for the fuse should have power. If not, power is lost between the ignition switch and that fuse. If it does have power, and windows still don't work, check the wire from fuse panel to the master switch-loose or poor connections, maybe a partially broken wire. If it looks good, check the ground wire for the windows. The ground wire originates at the master switch and will go back into the cabin to a nearby ground, possibly behind the left kick panel. If still no help, someone may need a volt- ohmmeter to start checking continuity of wires, voltage drops, etc.

Jun 18, 2013 | Cars & Trucks

1 Answer

GMC Sonoma will not go into Park


The first place i would start with this issue is either adjust or replace if needed the shift linkage cable usally a adjustment or two does the trick

Mar 12, 2013 | 1992 GMC Sonoma

1 Answer

96 gmc sonoma misfire after replacing multiple ignition parts


have you replaced the ignition control module in the distributor

Dec 08, 2012 | 1996 GMC Sonoma

1 Answer

1995 GMC Sonoma ran out of gas, now won't start?


Turn ignition forward a few times just far enough for accesories to come on(then try to start)

Sep 05, 2011 | 1995 GMC Sonoma

Not finding what you are looking for?
1996 GMC Sonoma Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...