Question about 2001 Toyota Sienna

1 Answer

Turn signal & 4-way flashers

Left & right turn signal does not work and the emergency flashers do not work. All fuses are good and bulbs all work.

Posted by on

  • 1 more comment 
  • Brandon Jul 28, 2013

    I am having the same issue and replaced the fuse and flasher unit and still nothing. Does anyone have any other ideas on what it may be and where to look?

  • Anonymous Mar 28, 2014

    all lights are working but not flashing

  • Anonymous Mar 31, 2014

    Where does the signal flasher module go? I found the emergency one but not the main.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 2,122 Answers

Hi dwilley58....Replace the flasher unit....
Regards Johngee10

Posted on Sep 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My right turn signal is not working i changed the bulbs and checked the fuse why is it not still working


What is year--make--model?
Neither the front or rear right turn work? If that is correct, I'd check the turn signal switch and wiring circuit.

Mar 16, 2016 | Cars & Trucks

2 Answers

My turn signal fuse blowed got new one now they dont work why


canada or USA, (diffr. laws, different wiring, even DRL up there)
station wagon or NOT?
THE TURNS FUSE BLEW OUT. 2nd time, 3rd,,,?????
that means the circuit is overloaded or shorted.! (prevents fire)
but did it blow a 2nd time, why not say so???

all 4 lamps dead. or stuck on, or flash odd. or what? dim?
does the cluster lamp flash, , in blink or emerg. mode?
wont work , means what, (dead or stuck on or dim)?????
do emergency flashers work? ,dead, stuck on what?
does car drive perfect day or night?
are any other things on car dead, of odd acting?
we see all this , 1st 5 min in a shop, zero here.
ive answered Forenza blinks here, many times.
ever search?

ill now answer by guessing USA non stationwagon and no DRL.
dash box fuse 4 kills blinkers

EF1 (engine fuse) 1 good?
dash fuse 14 and EF1 can kills emerg. flasher

so of Emergancy flash lamps blows fuse 14,(smaller of 2)
then the blinkers are in fact shorted.
does it?
if yes, then find out which side blows the fuse 3.
turns left blow or turns right blows.
so if say turns right blows, F4 fuse.
if true ?remove all bulbs front rear right bulbs.
does the fuse hold now,(means not blown)
then buy new lamps there. problem solved
bulbs can in fact short.
not just blow open.
Tell the full story and all this gets easy.
For sure emergency flash,

26123255-vhg5j1pxaeih5p05yacvrs2p-1-0.jpg

Mar 09, 2016 | 2007 Suzuki Forenza Sedan

2 Answers

Flasher relay location Pontiac Bonneville 2004 removal and installation.


If the right side works it's not your flasher, Its your left side bulb, either front turn signal or rear tail light bulb.

Aug 02, 2014 | 2004 Pontiac Bonneville

1 Answer

I have no signal lights, left or right, on my 2000 Oldsmobile Intrigue. I was having a problem with a front bulb not contacting properly making the right signal flash rapidly. I left it flashing while


Check if your emergency flashers still work. You possibly need a new flasher. Some cars have separate flashers for turn signals and emergency flashers, but some they are both together. If your emergency flashers still operate leave them on and find the flasher (follow the clicking noise the flasher makes) and see if there is another flasher right next to it. swap with the emergency flasher and see if your turn signals work again. If so, replace the faulty flasher.

Jul 26, 2014 | 2000 Oldsmobile Intrigue

1 Answer

My car signal stop funtion


have you checked the turn signal relay! It is above your left leg under the fuse access. under dash. do your emergency flashers work, because the relay is a combination relay for e-flashers and turn signals. if the flasher unit is ok, you may have a bad bulb or a short to ground.

May 17, 2014 | 1997 Dodge Grand Caravan

2 Answers

Turn signal will eluminate but not flash. emergancy lights work and flash fine. Have replaced the flasher and turn signal switch.


You know you have 2 flashers right, one for emergency flashers and one for signal lights? Does it refuse to flash on both sides, right and left? Have you checked all bulbs front and back are good?

Jan 27, 2013 | 1993 Plymouth Sundance

1 Answer

1995 Cutlass cierra Left turn signal works right goes on solid no blink


Usually it is a bulb because it takes all 3 or 4 to make the flasher work. Not all bulbs have to work for the emergency flasher.
If all of the bulbs are in fact good, it could be the turn signal switch.
On rare occasions the flasher is the problem

Jul 07, 2012 | 1995 Oldsmobile Cutlass Ciera

2 Answers

Turn signals and 4-way flashers do not work - 1997 Buick Century


Time to change the flasher unit, it's usually close to the drivers side of vehicle and behind a fuse box access panel and will have something like "12v 23/98W " on it. It's a largish cube shaped componant and may be water damaged !

Apr 10, 2010 | 1997 Buick Century

3 Answers

Flasher or turn signal switch


When you select left or right do any of the bulbs come on? If you select left check front and back left side if one of the bulbs did not come on the flasher will not work. Change the bulb that is out. Same with the right. If the fuse for the turn signal is good (check fuse or replace do not use visual, some appear to be good but are not).
The emergency flasher is different from the turn signal flasher. Look at manual for location of turn signal flasher. If you manually lift and lower turn signal control you may hear a clicking under the dash to locate the flasher.

Jan 02, 2009 | 1995 Chevrolet Caprice Classic

3 Answers

Blinkers not working


Did you check the bulbs? If one bulb is burned out, the blinkers won't word on that side. You could have one bulb burned out on each side. Start the car, put left signal on. Check front and back lights. Is one light on but not blinking? If that's the case, the light that's not on at all is burned out and has broken the circuit so the good light stays on and won't blink. Check the other side. You also have a 'flasher' , actually 2. One for emergency flashers, one for the turn signals. It could be that the turn signal flasher is shot. You just have to unplug it to remove. It's probably located near the fuses. good luck countrycurt0

Aug 10, 2008 | 1999 Jeep Grand Cherokee

Not finding what you are looking for?
2001 Toyota Sienna Logo

Related Topics:

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...