BROUGHAM 1. Disconnect electric-al connectors at blower motor,
compressor cycling switch, power module and radio lead-in connections. 2. Remove righthand windshield washer nozzle. 3. Remove righthand secondary air inlet screen from plenum. 4. Partially remove rubber molding above plenum. 5. Remove remaining screws and the primary inlet screen. 6. Remove blower motor. 7. Remove two screws securing compressor cycling switch to
module and position switch out of way. 8. Remove AC module cover attaching screws and the cover. 9. Disconnect heater hoses at heater core. 10. Remove screw and retainer holding heater core to frame
top. 11. With temperature door in max. hot position, reach
through temperature housing and push lower forward comer of heater core away from housing,
then rotate core parallel to housing. 12. Remove heater core. 13. Reverse procedure to install.
492 views
Usually answered in minutes!
×