Question about 1989 Toyota Camry

1 Answer

Power windows don't work

All power windows stopped working all of a suden All 4 windows do not work. Removed switch assy. from drivers door and disassembled, finding contacts burned badly. Previous owner had wire running from battery to switch, evidently to operate windows. Disconnected that wire, ordered new switch assy, installed and windows still do not operate. Haynes manual (very vague) shows a power main relay and a 30a power circuit breaker but I cannot find the location to check these (wire colors depicted in manual are wrong too). The power door lock switch did not work on the old switch either but it now works. I live in the south and am burning up. Anyone got some good troubleshooting steps / solutions for me?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 405 Answers

I can provide wiring diagrams and locations however I need to know what size motor you have. The 2.0L or 2.5L.

Thanks in advance

Posted on Jul 04, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drivers window sudenly stopped working, everything else ok ?


My guess is that the window switch is broke or the power window motor is bad.Might have toe replace one of them or both

Oct 05, 2014 | 2002 Jeep Liberty

1 Answer

Repair power window switch


I have been able to disassemble & clean the contacts on the switches for power windows on several different car models. These had tabs which allowed the switch to be disassembled. One was burnt because the motor pulled too much current (slow window movement) so lubricating the guides was also needed. Another was just gunked up from a liquid spill. Usually need to remove the door panel to get the switch out of the panel.

Aug 23, 2014 | 2000 Pontiac Grand Prix

1 Answer

Power window doesn't work


The window motors don't have brushes to replace,
you should see & feel that,as your inside the door

You remove the regulator assy & motor together,
then the motor

You will have bolts to remove & possibly rivets to
drill out

Sep 07, 2012 | 2000 GMC Jimmy

1 Answer

Both of the electric windows have stopped working on my 2 door ford focus


Try spraying some electrical contact cleaner into all of the switches on the main controll on the drivers door. With the vehicle running ignition on . It s likely just a bad connection water gets in between the window glass and the switches . If that dosn't work remove the main switch and clean the contacts and it will work again.

Mar 11, 2012 | Ford Focus Cars & Trucks

1 Answer

1998 Buick Regal the windows stopped working on all 4 doors. Ocasionally I would press the widow switch and they would work. I replaced the main switch on the drivers door and they still don't wor


ALL the windows share a common ground, this could be your problem. The ground wire originates at the driver's switch and goes back through the harness to the door, and into the cabin where I think the black ground wire may ground on a frame or bracket in the left kick panel. Just after it comes in from the door. You'd have to look behind the kick panel (foot well) covering to look for the ground screw. There could be a couple other ground wires there too. Or take your meter and check the integrity of the ground wire at the switch. Either use the ohm function or do a voltage drop test to check the ground.

Sep 21, 2017 | 1998 Buick Regal

1 Answer

Passenger side power window stopped working. other windows work. cant find fuse. help?


If all the other windows work, you don't have a fuse problem. You have a power switch problem that starts at the drivers door. Go live and I can walk you through it.

May 14, 2011 | Toyota Sienna Cars & Trucks

1 Answer

Power windows suddenly stopped working on all 4 doors. Been like that for 2 days. Don't see a fuse for the windows. Made sure that wires were completely in place in the plug on the doors. Still...


the power windows are on a circuit breaker.

Sounds like the drivers master switch might be bad. If you have a test light and/or a volt meter I would be happy to give you some info on figuring it out.

May 10, 2011 | Oldsmobile Intrigue Cars & Trucks

2 Answers

Can't find power window reset switch on a 2001 sebring


Theres no reset switch,test the motor if all window are not working then check all your fuses.even the ones under the hood, most times the windows stop working its due to a bad window motor or the driver door window control switch, pop switch iut and check the connections.

Sep 02, 2010 | 2001 Chrysler Sebring

Not finding what you are looking for?
1989 Toyota Camry Logo

401 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

79851 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...