How to reset my radio its saying err-error. - 2002 Honda Accord

ERR message on GM Delco CD Radio after ejecting CD Now CD will not work

read that thread i linked

it's possible to reset that GM radio by removing the fuse waiting a while for it to reset then re-installing the radio fuse

otherwise, it's time for an aftermarket head unit if that err 9 returns

98 T&C Chrysler /CD Problem Player Error ????

You need to be very careful Each failed attempt causes a long delay before you can enter it again. Follow the instructions exactly. You may need to use the car for a day or more before attempting it again if you failed too many times. The radio should say CODE not ERROR. Error means no code can be entered now. You must wait until the radio displays CODE.

yes if you have the code and the display reads error then you need to reset the audio unit. to reset you can disconnect the neg and pos battery cables hold them so they are touching each other for approx 30 seconds. reinstall cables and the error message on the audio unit sounds be cleared and you can now enter you code. if it still reads error then there may be internal damage to the audio unit- hope this helps

Sounds like the radio has a problem, there is a site on the web that you can research the error code. I don't remember the site but search your radio and problem on the web. Your radio should either display the error code or the light may be blinking, record the number of blinks for reference.

either the radio must be replaced, because honda has problems with the radio. or you need to disconnect the battery for 10 seconds then put in the radio code again

err-3 means you have entered incorrect anti-theft radio code more that three times.If you do not have radio code you can most of the time find the code card tucked away in the owners manual pouch.(looks like a bussiness card)If you are unable to find card you would have to pull radio from dash and retrive stereo serial number,which is on bottom side of radio.once you have s/n you can take s/n to any acura dealership(has to be a dealer)and they can get radio code for that stereo through Honda Corp.once you have correct radio code you will need to first unplug radio,or disconnect battery to reset radio memory,then type in radio code.again if entered incorrectly 3x ,radio would need to be reset again too clear error codes.good luck!

We had the same problem. As advised from another website, we unhooked the battery and hooked the cables together for about 10 minutes. This reset the radio and allowed us to put in the 5-digit code. Now we're jammin'!

you need to take the neg (-) battery cable off to reset the radio. you can only enter the radio code 3 times incorrectly than it will lock up. i think you can pull the back up fuse from the under hood fuse box for 10 seconds and that will also reset it.

turn key to <acc> turn radio will blink err. leave on for at least half hour.err will be replaced by enter code.