Question about 2006 Chevrolet Blazer

1 Answer

On my blazer s10 4 wheel drive a 10amp fuse keeps burning out, shutting down my speedometer, rpm gauge and battery gauge. Which wire would cause that?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 92 Answers

First make sure all is well take that 10 amp fuse out and try a 20 amp then a 25 amp fuse then let me know and ill help you furthur diagnose it.

Posted on Dec 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuse for the gauges on a 2004 chevy burban?


The IPC/DIC fuse 10amp located in the under hood fuse box . Also check SEO B1 fuse 15amp in same fuse box . Plus IGN E fuse 10amp. an SEO IGN. fuse 10amp All in same fuse box ! If you find the fuse are all good the stepper motors inside the instrument cluster that control the gauges are bad an need to be replaced ! How to repair GM Instrument Cluster Speedometer Gauge Stepper

Sep 22, 2016 | Chevrolet Cars & Trucks

3 Answers

Engine shuts down,loose of power,replaced battery,altornator...2nd battery held charge.stills dies out when I drive..will the key switch solve this problem


Is the battery / charge light lit on the instrument cluster ? Did you have the charging system tested , they'll do that for free at auto parts store ! Do you have battery voltage at the bigger wire at the back of the alternator ? This wire supply's the current to charge the battery ! The smaller wire in the connector supply's voltage to turn the alternator on. Your running down your battery that's why it shuts down . It's not the key switch . If no battery voltage on the bigger wire ,check fusible link at the battery ! all so check gauges fuse in the instrument fuse block it is a 10amp fuse . Do you have the battery symbol light , light up when you turn the key on ?

May 10, 2015 | 1997 Chevrolet Blazer

1 Answer

Fuse (10 amps) that provides juice to temp gage, rpm, speedometer and fuel gage keeps blowing up.


Try to use a 20 fuze one if it burns out that quick use a bigger recemend using a 20 or 25 fuze

Jul 27, 2014 | 2001 Chevrolet Chevrolet Blazer

1 Answer

The gas gauge,speedometer,and temp gauge does not work, what shall i do to fix it.


Those gauges get power from a 10amp fuse marked CLSTR and a 10amp fuse marked BCM/CLU. The fuses should be in the fuse box inside the car.
Have you checked those fuses to see if they have power ?

Apr 09, 2013 | 1999 Pontiac Sunfire

1 Answer

1997 Chrysler Town & Country, codes; p1698, p0734, p1782, p1788, p0732, p1787, and p0700? Plz help


You will need the help of a transmission repair shop or the dealer, there is a serious transmission problem and it will require special test equipment and training to find the cause, which is likely a wiring harness issue.

Aug 06, 2012 | 1997 Chrysler Town & Country

1 Answer

Pontiac sunfire Gauges not working after Battery change


Just pull out the 10amp cluster fuse and put it back in. The cluster will pop right back up. My 2004 does it every time the battery goes dead.

Apr 23, 2012 | Cars & Trucks

1 Answer

2000 chevy blazer 4X4. After driving twenty to thirty miles on freeway when I pull off to the off ramp and come to a stop my battery gauge will start to flicker as well as my fuel gauge, will do that...


Are there any codes in the pcm?
There are quite a few things that could cause this;
Make sure the battery cables are tight and clean.
If you have a way to do it, need to find out what the fuel pressure is at when it is acting up.
Dose it miss at all or just loose rpm's and die, no matter what you do? (meaning can you keep it alive by pressing the gas peddle)

To me it sounds like your new fuel pump is loosing pressure while running for a while. But try and get a pressure reading and post back, that will give us something to rule out, or to address.
I think the light flicker you are talking about is just low engine rpm's?

Oct 17, 2009 | 2000 Chevrolet Blazer

3 Answers

Speedometer, gas gauge, odometer, rpm gauge not working


My gas guage, speed odometer and tempiture does not work
The speed odometre is reading 9999999 what should i do

Jul 29, 2009 | 1998 Nissan Frontier

Not finding what you are looking for?
2006 Chevrolet Blazer Logo

Related Topics:

218 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...