Question about 2000 Toyota Sienna

1 Answer

Lowbeam how to adjust the lowbeam headlight on driverside ?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 1,986 Answers

The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

Posted on Sep 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lowbeam headlight,s won,t come on


Hi There are 2 fuse boxs one under the hood near the battery. The other under the dash left driverside pannel. The relays are under the pannel... Good luck.
If you need more help look in Manual under fuse/relays.

Mar 21, 2014 | 2006 Chrysler PT Cruiser

1 Answer

Hi I got a problem with my Volvo V70 headlights. When i turn on highbeam, the lowbeam reflector adjust itself up, providing more light to the high beam. After i mounted a h9 55w xenon kit into the hi


it may need reset at the dealer to accomodate the new style/type of lamp..unless the cars', original factory setting does not allow for that change to be made.. they can tell you either way..

Dec 24, 2013 | Volvo Cars & Trucks

1 Answer

When I turn on my headlights the lowbeam lights will not come on. I switched the highbeam and lowbeam wires to see if it was the wires or the lights. the lowbeam lights came on when i put the high beam...


It is either the light switch or the headlight relay, I would say first go for the relay as it carries the actual load of the lights. It will not be a fuse, the headlights are fused individually.

May 09, 2011 | 2000 Dodge Ram 1500 Truck

1 Answer

How do you adjust the highbeam headlight on 08 G6


there is no separate for the highbeam. Basically, you are forced to use one screw for both and have to compromise

Nov 16, 2009 | 2006 Pontiac G6

1 Answer

Right side head light dose not work on lowbeam, bulb was replaced and still doesn't work.


THERE ARE FUSES THAT PROTECT THE HEADLIGHT CIRCUITS. CHECK TO SEE IF THE FUSES ARE GOOD. THIS SHOULD HELP YOU OUT REAL QUICK. THANKS FOR USING FIX-YA AND FOR AN HONEST RATING AS WELL. PLEASE KEEP ME POSTED. GOOD LUCK

May 29, 2009 | 1995 Ford Explorer

1 Answer

I have a 2004 corolla having problem with headlight


It's not a fuse problem, check the ground for that light assembly

Apr 19, 2009 | 2004 Toyota Corolla

1 Answer

Headlight adjustment


If you look at the front of the headlight, there are actually a couple of screws around the edge. These are your adjustment screws.

Mar 23, 2009 | 2004 Chrysler PT Cruiser

1 Answer

2003 Toyota Sienna Vertical Adjustment


should be adjustment under hood look for place where phillips screw driver goes in and meshes with the lenses to adjust it

Dec 27, 2008 | 2003 Toyota Sienna

1 Answer

How do you align headlights on ford cougar?


When you open the hood and look at the headlight assembly you will see 2 plastic gears, they take a hex tool, and the one to adjust the lowbeams is the outermost one towards the fenderwell of the car, the high beam adjustment is the one closest to the radiator.

Hope this helps.

Oct 10, 2008 | 1999 Mercury Cougar

Not finding what you are looking for?
2000 Toyota Sienna Logo

400 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...