Question about 2003 Honda Civic
Press and hold trip meter button - insert key and turn ignition to second position while continuing to hold trip meter button - when maintenance light stops flashing you can release button and remove key
Posted on Jul 12, 2008
SOURCE: Maintenance Required light
The light needs to be reset. Usually after an oil change they will reset it for you. Directions for doing yourself>>> turn off the engine, press and hold the select/reset button in the instrument panel then turn the ignition switch on. Hold the button until the indicator resets (approximately ten seconds). Directions from your Honda manual. Hope this helps!
Posted on Jun 04, 2008
SOURCE: my car honda accord v6
This light is preset by the dealer to come on at service interval. This light can be reset, contact me if you need info on how to reset. Good Luck Looking foward to FIX ya
Posted on Dec 16, 2008
I'm not quite sure on a Toyota, But on a Acura it just meant that by mileage your getting close for your 7500 mile service. then when the light stays on that means your due for the service. also check your owners manuel.
Posted on Feb 23, 2009
Engine management problem. Need to see a mechanic who can scan the ecu for faults, could be coolant temp, oxy sensor, coil pack... The list goes on.
Posted on Nov 24, 2011
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Nov 24, 2011 | 2007 Toyota Corolla
Jul 28, 2008 | Scion xB Cars & Trucks
Sit inside the driver's seat of the Honda Accord and close the driver's side door. Any interior lights on can prevent the maintenance required light from resetting properly on some year models.
Insert the key in the ignition.
Depress the odometer/trip button located beneath the odometer on the instrument panel. Hold the button down.
Turn the ignition key two clicks forward to the accessory power position. This is also known as the key-on/engine-off position.
Continue to hold down the odometer/trip button for up to 15 seconds until the maintenance required light goes out. On some Accord models, the maintenance required light may blink once before going out.
Release the odometer/trip button and then turn the ignition key to the off position.
Start the Honda Accord to ensure the maintenance required light is no longer illuminated on the instrument panel. If it still is, the reset procedure did not take and you'll need to repeat the procedure.
Apr 13, 2011 | Honda Civic Cars & Trucks
Mar 20, 2011 | 1991 Dodge Ram
Jan 02, 2011 | 2005 Honda Civic
Dec 20, 2009 | 2001 Honda Civic
Mar 08, 2009 | 2001 Honda Civic
Feb 23, 2009 | 2008 Toyota Sienna
242 people viewed this question
Usually answered in minutes!