Question about 2002 Mitsubishi Galant

1 Answer

Temp control problem

Posted by miltruss on Jul 03, 2008 Report abuse

I have a problem with the temp control. If I turn the temp to cold it will make a noise fluttering noise and then change. It will do the same thing for heat. If if turn the temp control to cold during the day. It will not change temp until the next moring when I turn the car on. I have to put it to full heat it will make the fluttering noise and then I will get heat. Also I have noticed now that my fan on high seems to be making an noise like something is blocked or somehting is in the fan. Or possible a damper is closed. There is something going in side the fan it seems to send the air to the right areas. Like defrost or on the floor.

Posted by on

  • Anonymous Aug 20, 2008

    When I Put The Heat Cold Air Comes Out Or Sometimes It Makes A Noise And The Heat Start To Come Out

  • Anonymous Aug 22, 2008

    The temp control is working, the heater inlet hose is warm but heater won,t give hot air.

×

1 Answer

I just repaired my 02 Galant with same problem. I removed the heater control box and disassembled and applied 12 volts dc and verified motor was ok. Then attached the plug back on and checked in car still not moving. Removed the screw holding the temp. control and cleaned contacts and applied pro-gold contact cleaner and preserve re-assembled and heater works like a chame. Saved 400-500 bucks and we have heat. About 2 hours labor to remove bottom part of dash and troubleshoot.

Posted on Oct 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Car momentarally shutters at all speeds and gears more and more frequently after it is warmed up. You can feel it slightly at idle.


2003 neon shaking after changing both right motor mounts ...

www.topix.com > Dodge Neon
Mar 10, 2012 - ... News Offbeat Stars! Topix > Dodge Neon > 2003 neon shaking after changing both. .... Google dodge neon engine alignment, and some sites will fill you in better. Reply ยป. Report Abuse .... 95 neon oil leak? (Oct '08), Oct 22 ... dodge neon engine vibration
Nov 10, 2012
2004 Dodge Neon SXT Problems
Jan 8, 2011
02 neon vibration under acceleration
Jul 21, 2007
97 Neon Idle rough
Jan 18, 2007
More results from www.topix.com

Oct 29, 2015 | 1995 Dodge Neon

1 Answer

Hot air from drivers side cool air from passenger side


Driver's side blows hot air; passenger side cold air - Hyundai ...

www.hyundai-forums.com/.../294097-drivers-side-blows-hot-air%3B-pa...
Jul 29, 2014 - 3 posts - โ€Ž3 authors I soon noticed that the driver's side blows warm air and the passenger side blowscold air as it should. No amount of adjusting the temp control ...

Hot air on driver side vents - Cold on passenger side - Page 3 ...

www.odyclub.com/.../46646-hot-air-driver-side-vents-cold-passenger-si...
May 9, 2012 - 16 posts - โ€Ž10 authors I have a 2009 EXL Odyssey that just is doing the same thing (warm air on drivers side, cold on passenger). I checked freon levels and ...

Oct 15, 2015 | 2009 Hyundai Sonata

1 Answer

Daughter while driving temp light came on. However less then 3 days ago had all fluids and oil changed any thoughts?


Hello, if the water in the radiator was quite low, before topping up, there could be an airlock in the system. Does the internal heater blow hot air? If it only blows cold air, even when the control setting is set to hot this indicates either low water level or air lock in the heater matrix or pipe feeds to it. Quite a few models have bleed valves on the pipe runs under the bonnet just before the bulkhead.
Hope this helps you.

Oct 04, 2015 | Cars & Trucks

1 Answer

I activated the cruise control on my 95 Nissan Sentra and now it won't disengage...any suggestions?


Cruise Control Problem - Nissan Forum

www.nissanforums.com/b13-91.../135028-cruise-control-problem.html
Jun 21, 2007 - 4 posts - โ€Ž3 authors 1994 Nissan Sentra 4Door XE with 5 Speed Manual, GA16DE, 230k Miles. ... Now theCruise control light in the middle of the dash will NOT light up and the cruise control will not engage no matter what button I push. .... Cruise Control NOT working.. sentravis, B14 95-99 chassis, 26, May 29th, 2009 12:24 ... speedometer not working?
15 posts
Aug 3, 2007
Solution for P0500 VSS speed sensor problem on Nissan ...
15 posts
Jul 10, 2007
Solved flashing cruise control light
8 posts
Sep 8, 2006
cruise control problem
11 posts
Jul 13, 2005
More results from www.nissanforums.com

Sep 30, 2015 | Nissan Cars & Trucks

1 Answer

With AC on cold, Drivers air full hot & passenger side full Cold


that is a good possibilty, but before I pulled the trigger I would try this first. unhook the battery for 5 minutes, rehook it, now turn the key on, wait for 2 minutes, now start the truck and see if the doors now work. sometimes this works, its worth a try.

Sep 26, 2009 | 2005 GMC Sierra

1 Answer

Report abuse


it means if someone calls you a name or uses profanity then you can report them and someone will review it if the are habitual then will be removed from fixya

Feb 10, 2009 | 1991 Jeep Wrangler

1 Answer

AC button blinking


hi mercedes,

here is another thread that is almost similar to your problem, i just paste it here with my reply...

posted by Ron0293 on Sep 27, 2008 Report abuse
1985 toyota Camery in hot weather the car AC quits and will not engage the pump. After it cools the pump will come on again. When this happens the AC button in the car blinks. i know this is a vacuum and/or temperature sensor but i don't know which one it is. The manual I have does not say anything about it. Other wise the AC works just fine. Ron Comment by Ron0293, posted on Sep 27, 2008When I first turn it on the AC is working fine, blowing cold air all the time, the clutch pump is in gauged...when the problem occurs the clutch disingauges and then no cold air.. Comment by Ron0293, posted on Sep 27, 2008When I first turn it on the AC is working fine, blowing cold air all the time, the clutch pump is in gauged...when the problem occurs the clutch disingauges and then no cold air.. It is a sensor somewhere telling the pump to turn off. Comment by Ron0293, posted on Sep 28, 2008there is nothing wrong with the whole AC system when the compressor is pumping! no holes, no leaks, no heater problems or fan problems. The compressor keeps cutting out when the temperature starts to climb. I believe the system has a motor vacuum load/temp. sensor that cuts the AC out when the motor temp. rises from extra load. IE: like going up a long hill. I just don';t know where the sensor is located and the clutch wiring from the compressor is impossible to follow, as it is buried in a wire harrness. Comment by Ron0293, posted on Sep 29, 2008 There are two fans located at the rear of the radiator. They don't seem to be running when the AC pump cuts out. There is a sensor switch on the dryer. when the pump is acting up if i disconnect the sensor wiring the fans start running on high. There is also another sensor on the pump and when i disconnect it the fans start running on high. replacing the wiring returns the fans to off.
There is also a sensor, seems to be internal on the pump and when I disconnect it nothing happens. if(typeof LIB_LOADED == 'undefined'){document.write(''); } Add a Comment

Oct 01, 2008 | 2002 Toyota Camry

1 Answer

2000 Mazda Millenia


Exhaust leak? Please describe. Make sure correct spark plugs were used (I think gap distance makes a difference, but ask a local mech or store parts employee) and the intake manifold is put back on with correct torque specs. Make sure there are no leaks in the air intake hose, air box, etc as this will effect performance.

Jul 28, 2008 | 2000 Mazda Millenia

1 Answer

What are you posting same 2 links for??


Hi man, i'm understand your anger, if its so bothering you so report abuse about them, or write to fixyas costumer's service...

Jun 30, 2008 | 2006 BMW 545i

Not finding what you are looking for?
2002 Mitsubishi Galant Logo

284 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...