Question about 1994 Hyundai Excel

1 Answer

No spark in one cylinder

Hyundi lantra sports wagon 1997 has no spark in one cylinder.i have changed spark plug and checked lead is ok

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

Pls try to check/replace your distributor cap and/or the rotor. A friendly reminder, pls check that the spark plug gaps are within specifications, the wider the gap the the more arcing from the rotor to the bottom terminals of the distributor cap, the faster the burning/deterioration. If at all possible, try to replace with Bosch or Beck Arnley brands.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Posted on Jul 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How i can change spark plug seals in Hyundai lantra sports wagon


You must remove the valve cover as they are serviced on then.

Mar 19, 2014 | 2007 Hyundai Sonata Limited Sedan

1 Answer

Hi i have Hyundai lantra sports wagon 2000 model i was trying to remove spark plug seals but all stuck like hard plastic when i try to remove one of seal from cover broken i have new seals so any one can...


put sumthing in the plug hole and then soak the seal with CILIT BANG this will dissolve the carbon build up .Make sure nothing goes into cylinder try trimming a cork to use as a stopper gaad luck

Mar 19, 2014 | 2000 Hyundai Elantra

1 Answer

Not firing on 1 cynlinder


change faulty sparkplug or ht lead,check lead by holding sparkplug end near to engine nearly touching,have someone turn engine over whils checking for spark jumping,if spark present then not lead,change spark plug,if sparkplug ok then check pressure in cylinder, poss piston damage

Jan 02, 2012 | Cars & Trucks

1 Answer

I have just bought a 1997 Mazda capella station wagon automatic. It was running on 3 cylinders and i just took the spark plug leads out and the 2nd and 3rd holes had water in them above the spark plug. Do...


if the engine has been steamed cleaned that may have caused this to happen, get all the water out of the area & check in a few days to see if it happens again,if it does you will have to try & find where the water is leaking from.......hope this helps......cheers.

Sep 19, 2011 | Mazda 626 Cars & Trucks

2 Answers

I have a 2000 model hyundai lantra sportswagon, that is currently running on 3 cylinders only, very ruff idle and under powered, the spark plugs are ok and there seems to be adaquate power going to each,...


will let we look at simple one first---- you said you getting spark at the spark plug lead , ok , the plug is good ---- check the injector plug -- take it out and see if it have rust or dirth stuff on the injector pins --- if yes clean it ----if not , the injector might me bad . to know what you can inter change the injector and see what happens . reply. if alot of work to to change the injector see one to buy and the cost , which is the best

Aug 13, 2010 | 2000 Hyundai Elantra

2 Answers

Mazda Eunos 500 - Engine lacks power - investigation reveals strong sparks on all cyls fuel at all cyls compression to specification on all cyls timing ok. Removing spark plug lead on cylinder one makes no...


You said compression is good then i would say you may have a bad coil , unless one coil runs all cylinders, but could still be a coil,,next thing i would check would be the injector make sure it gets a pulse if it does then try switching injectors from that cylinder to another cylinder and see if the weak cylinder changes with the injector change, if it does then you have a bad injector,

Jun 14, 2010 | Cars & Trucks

1 Answer

1 plug miss fireing


You may be have troublecodes that will give you an indication of which cylinder is giving you the problem. P0300 indicates a misfire and if the 3rd digit is something other than 0, it tells you the cylinder. As an example, P0305 means the #5 cylinder is misfiring.

That being said, check all wiring and connectors that lead to the cylinders (i.e. spark plugs). Depending on how long the ignition components have been in the car, it may be a good idea to replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wires, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the catalytic converter has gone bad. If you smell rotten eggs in the exhaust, your cat converter needs to be replaced. I've also heard in other cases the problems were faulty fuel injectors.

Oct 29, 2009 | 1997 Pontiac Trans Sport

1 Answer

Some power windows working other not


Could be the motors or the switches

Jan 25, 2009 | 1998 Hyundai Elantra

Not finding what you are looking for?
1994 Hyundai Excel Logo

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...