Question about 1996 Ford Windstar

1 Answer

Cylinder numbering What is the numbering sequence of a 3.8 litre engine on a 1996 windstar

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This is for gustheguard on the numbering sequence on a 3.8L engine.from standing in front of the vehicle looking at the engine the numbers go 1 2 3 left to right at the back of engine close the firewall and 4 5 6 left to right in front of radiator. any thing else u need to know b/c I have the same vehicle.

Posted on Jul 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need head bolt torque specs for a 1996 saturn sl


Quote:





Originally Posted by norvelplagbao52

1993 saturn sl2 1.9 dohc cylinder head torque
specs and sequence
Cylinder head bolt
tightening procedure:
CYLINDER HEAD BOLT TIGHTENING SEQUENCE:

INTAKE
SIDE
8 4 1 5 9

7 3 2 6 10
EXHAUST SIDE

In sequence,
torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs).
In sequence,
torque all bolts. Torque: 50 Nm (37 ft-lbs)
In sequence, turn each bolt an
additional 90 degrees.





Originally Posted by norvelplagbao52

1993 saturn sl2 1.9 dohc cylinder head torque
specs and sequence
Cylinder head bolt
tightening procedure:
CYLINDER HEAD BOLT TIGHTENING SEQUENCE:

INTAKE
SIDE
8 4 1 5 9

7 3 2 6 10
EXHAUST SIDE

In sequence,
torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs).
In sequence,
torque all bolts. Torque: 50 Nm (37 ft-lbs)
In sequence, turn each bolt an
additional 90 degrees.

Sep 19, 2013 | 1996 Saturn SL

1 Answer

Correct pressure for torque the head of mazda pickup 1998


Since you didn't say which engine you have, I've pulled torque specs for 3 different engines. Also, since I can't include a diagram showing the relative locations of the numbered head-bolt locations, it would be a good idea for you to purchase a vehicle specific repair guide that will show this info.


Take particular note about the TTY (Torque to Yield) bolts used on 2 of the 3 engines shown. It is said that new head bolts MUST BE USED when head is replaced or re-installed to obtain the proper torque.



B2500 4 Cylinder

Torque sequence: --------- ' 10 6 2 4 8 ' front ' ' ' 7 3 1 5 9 ' -----------Step 1: torque in sequence to 51 Ft/Lbs Step 2: torque again in sequence to 51 Ft/Lbs Step 3: final tighten all bolts an additional 90 to 100 degrees recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) that permanently stretch during the initial installation. New head bolts must be used when cylinder head is replaced or re-installed to obtain proper torque.







B3000 3.0 6 Cylinder

Torque sequence ---------- ' 6 4 2 8 ' ' ' ' 5 1 3 7 ' ---------- Step 1: torque to 59 Ft/Lbs Step 2: loosen in sequence (1) full turn Step 3: torque to 41 Ft/Lbs Step 4: torque to 73 Ft/Lbs









B4000 4.0 6 Cylinder

Torque sequence --------- ' 5 1 3 7 ' ' ' ' 6 4 2 8 ' --------- Step 1: torque cylinder head bolts in sequence to 26 Ft/Lbs Step 2: torque cylinder head bolts to 56 Ft/Lbs Step 3: turn cylinder head bolts in sequence an additional 90-degrees recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) that permanently stretch during the initial installation. New head bolts must be used when cylinder head is replaced or re-installed to obtain proper torque.


Good luck with this job!

Feb 06, 2011 | 1998 Mazda Pickup

1 Answer

Changed the spark plugs and wires on 1996 ford windstar 3.8 liter V6 put the wires back wrong. runs not right


STANDING IN FRONT OF VAN FRONT CYLINDERS FACING YOU LEFT TO RIGHT IS 4 5 6 BACK CYLINDERS LEFT TO RIGHT IS 1 2 3 GET A PIECE OF PAPER WRITE NUMBER 51 THEN WRITE NUMBER 62 UNDER 51 THEN WRITE NUMBER 43 UNDER 62 THATS YOUR COIL PACK WIRES LOCATION MATCH THEM WITH THE CYLINDER SPARK PLUGS YOU HOME FREE.

Oct 23, 2010 | Ford Windstar Cars & Trucks

1 Answer

Cylider head torque specs ford windstar 1996 3,8 cylider V6


Position the cylinder head on the cylinder block. Tighten the cylinder head bolts in 2 steps following the proper torque sequence. The first step is 37 ft. lbs. (50 Nm) and the second step is 68 ft. lbs. (92 Nm).


98c7056.gif

Oct 21, 2010 | 1996 Ford Windstar

2 Answers

What is the fireing order on a 1998 Ford winstar


Firing order and cylinder numbering - all 3.0 and 3.8 engines:


Firing order:

1-4-2-5-3-6


Cylinder numbering:

  • Windshield side
    1--2--3
    4--5--6
    Frt. Of vehicle




Coil numbering:
    • --4 PIN--
      ----------------
      --1--- 2--- 3--
      ----------------
      --5--- 6--- 4--
      ----------------

  • NOTE the irregular sequence on the 5-6-4 side. Weird, but that's the way it is.

Sep 27, 2010 | 1998 Ford Windstar

2 Answers

1998 windstar 3 litre number 3 misfire ,changed plugs, wires, coil, injector, any ideas?the only codes are number three misfire


did you leave your battery hooked up while you were replacing the spark plugs and coil and such? try resetting your ECM.

Jan 15, 2010 | 1999 Ford Taurus

3 Answers

Need to know the firing order for a 1999 ford windstar van V6


Firing order:

1-4-2-5-3-6


Cylinder numbering:

  • Windshield side
    1--2--3
    4--5--6
    Frt. Of vehicle



Coil numbering:
    • --4 PIN--
      ----------------
      --1--- 2--- 3--
      ----------------
      --5--- 6--- 4--
      ----------------

  • NOTE the irregular sequence on the 5-6-4 side. Weird, but that's the way it is.

Jan 04, 2010 | 1999 Ford Windstar

1 Answer

Forgot where spark plug leads go


front to back cylinders are 1 2 3 4 5 6 on your cap there should be a #1 going clock wise here is the firing order 1 5 3 6 2 4

Feb 15, 2009 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
1996 Ford Windstar Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...