Question about 2003 Ford F350 Super Duty DRW SuperCab

1 Answer

How to replace actuator on F350 V0

How to replace door lock actuator on a '03 Ford F350 v10 -1ton-crew cab.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 1,010 Answers

My right sliding door's lock doesn't function either. I took off the door panel and found that the lock mechanism was broken. Normally I would think this strange, as the lock mech is metal. But since this is a Plymouth product, I some how think it should be normal for something to break off without it ever getting a direct hit. I can only assume that my kids closing the door too hard might have had something to do with this. Anyway, the whole lock mech needs to be replaced, and I haven't even tried to see how much that will cost me. This Van has cost twice in repairs than what I paid new for it. (just kidding, but it sure feels like it). If you have an answer to this query

Posted on Jul 06, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1996 f350 crew cab rear power door lock won't unlock

Does it lock you might have to clean the contacts on the lock actuator and the plug if that doesn't work then replacement is needed for the actuator

Nov 07, 2016 | Ford F-350 Cars & Trucks

1 Answer

Where can I buy a door lock actuator rivet for a 2001 ford expedition Dorman 746-157 Door Lock Actuator ... > ... > Motors > Power Door Lock, Inc.
Rating: 4.5 - ‎23 reviews Dorman 746-157 Door Lock Actuator: Automotive. ... FYI. you do NOT have to drill out rivets and replace with nuts and bolts. Use a long ... My advise is to spend a little more on a different brand and buy something that works. ... works great on the 2000 Ford Expedition 5.4 V8 ... Great for 2001 F150 crew cab.

10 Ford Door Lock Actuator Peel-Type Rivet N808689-S417 > ... > Interior Switches > Door Lock, Inc.
Rating: 5 - ‎2 reviews 10 Ford Door Lock Actuator Peel-Type Rivet N808689-S417: Automotive. ... Verified Purchase ... For reference, I put these on my 1999 Expedition.Missing: 2001

Dec 02, 2015 | Ford Cars & Trucks

1 Answer

2003ford f250 Central locking lacks enough power to operate all door locks

You actually have enough power to operate the locks, but you have a bad actuator. I'm not sure where the actuator is on your truck, but go for the actuator getting replaced and you are good to go.

Jan 01, 2015 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

Broken door latch on F350 ford 4wd truck

change the handle but make sure you change the cable as well,they stretch which causes you to pull harder

Jan 17, 2010 | 1996 Ford F350 Crew Cab

1 Answer

I rolled my driver's side front window down all the way and it won't come back up. When I push the button, it doesn't make a sound or anything. Don't know if its just stuck or damaged. The truck I have is...

you'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. and disconnect the window switch and you can test that.. if it's not that. then you may have a broken actuator or motor. You can then pull off the weather seal in order to see the inside of the door....

Aug 20, 2009 | 1997 Ford F350 Crew Cab

1 Answer

Ford F350 Crew Cab Power Window Problem

Did you check for power at the switches. Are you sure the fuses are ok. Sometimes the wires break because of opening the door. You will have to inspect the harness and maybe have to remove the door panel. Most likely its a driver door wiring issue or the fuse.

Aug 05, 2009 | 1997 Ford F350 Crew Cab

1 Answer

Cant find the blend door actuator on 2003 ford f150 super crew

The temperature blend door actuator is located on the right side of the transmission hump under the evap. case. The floor ducts cover it.

Jun 21, 2009 | 2003 Ford F150 Regular Cab

1 Answer

Replace door actuator

If you mean the door lock actuator you have to grind or cut or drill the rivit that holds it. Then you will need a 1/4" pop rivit to hold new one on.

Feb 18, 2009 | 1999 Ford F350 Regular Cab

2 Answers

1995 F350 crew cab

Depending on if you have tilt steering or not will determine how easy it is to replace, but in the 1995 F series some times the pin on the actuator plastic shaft, titl steering, falls out. This causes you to be able to start, but not shut your engine off.

Jun 14, 2008 | 1995 Ford F350

1 Answer

Door switch

be a little more specific on the door switch please

Jun 12, 2008 | 1999 Ford F350 Regular Cab

Not finding what you are looking for?
2003 Ford F350 Super Duty DRW SuperCab Logo

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

5626 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides