You may have inadvertantly locked the passenger windows by pressing the little button to the right of the door locks (on the driver side). It's a push to lock/push again to unlock type button, so try pushing it--if it stays down, then that wasn't the problem. If it comes up, then try the window. I hope that helps
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You can adjust the door latch by aligning the male and female portion of each. This can be adjusted by loosening the screw and aligning it. And finally when aligned, tighten the screw. Unless otherwise if the door hinges are loose, such that the doors are misaligned, then, you have to replace the door hinges. Or put a bushing at the door hinges to keep it aligned. This will correct the defect.
You didn't say if the window doesn't work with both the switch at the drivers door and at the rear door. If it works at one and not at the other, then that switch is bad.
The windows all use the same fuse. Most likely the motor has froze up from corrosion, or the wire to it is broken. The wiring goes into the door by the hinges in a rubber convoluted hose, and it bends back and forth each time the door is opened and shut.