Hey there is a sensor on the air duct is call mass sensor if is dirty can make trouble with trotle position sensor , mass sensor mesure the amout air is going into the engine and the ecu put the gas if is dirty or bad is no sending the right information to the ecu and wen you push the gas pedal that way the engine dont stall the ecu dont now what is going out
Computer has gone into limp mode. Is the engine light on? It should be. Please get a free scan at your local parts chain and send us the trouble codes. These will help us diagnose the problem and recommend appropriate actions.
Thanks for using FixYa
I threw a P0171, P0106, and an occasional P0300. I have replaced the MAP sensor (Napa Autoparts recommendation), the spark plugs, and put in the injector cleaner. Still chugging badly and dying. Help? Hide Comments
OK, sounds like a vacuum leak and maybe the baro sensor is bad too. Is the P0106 still showing after the new MAP sensor? Have you checked all vacuum lines for leaks? If yes, spray some carb cleaner on the intake manifold gaskets while the car is idling. If it revs at all your gaskets are leaking. Is this a 4-cylinder or V-6?
×
1,627 views
Usually answered in minutes!
I threw a P0171, P0106, and an occasional P0300.
I have replaced the MAP sensor (Napa Autoparts recommendation), the spark plugs, and put in the injector cleaner. Still chugging badly and dying.
Help?
×