Question about 2005 Audi A3

1 Answer

Jerking problam Audi A3

Hi can any one help me. I have Audi A3. In low gear in jerks. I have changed oxygen sense but no luck lost £100. It is consuming to much fuel as well. Thanks lnayyer@yahoo.co.uk

Posted by on

  • Anonymous Jan 28, 2009

    My revs drop and almost stalls the engin when pulling away.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Take out your MAF sensor, positioned on main air intake pipe to throttle and clean it with Carberetor Cleaning spray and away you go. this is the first thing to check and normally very common.

Posted on Jul 12, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a problem with my audi a3 it keeps jerking when im accelerating. what could be the problem


Hard to say, most likely throttle body sensor, maybe your engine overheated.

Mar 27, 2015 | 2008 Audi A3 2.0

2 Answers

Sudden jerking wen my acura mdx 2004 model want to change from gear one to gear two.


Your best bet is to get your transmission check sound like it freezing up before it gets worse.good luck.

Feb 20, 2015 | 2004 Acura MDX

1 Answer

Automotive


Hello everyone having similar sort of issues , any help would be much appreciated ,, trouble with my 04 plate a3 2.0 tdi , the car loses power in first and second makes a lot of noise but doesn't really go anywhere but if ease completely off and back on again the turbo kicks in properly it also won't go over 4000 rpm unless I go off and on the throttle any help would be greatly appreciated also I took the vacuum resivour pipe off whilst checking a few things and it cured it until I was cruising down the motorway and it just lost all power so I stopped and put vacuum resivour pipe back on and after about 15 mins the vacuum must have built back up again because it was back to just being useless in 1st and 2nd gear ..???????? Help !!!! I'm lost

Apr 15, 2014 | 2009 Audi A3

1 Answer

Mercedes E320 Auto Diesel CDI jerking when changing gears


Have you let a younger faster driver borrow your vehicle the gearbox computor will learn the harder driving style and adjust the adaption data to suit his harder acceleration and make it jerky for you

Mar 20, 2014 | Mercedes-Benz E-Class Cars & Trucks

1 Answer

Problems with audi a3


No idea without a play but i do know these engine do suffer from head gasket problems on no4 cylinder other than that i would need my head under the bonnet sorry for the indecisive answer

Jan 29, 2014 | 2004 Audi A3 2.0

1 Answer

My car sputters and jerks during acelleration and the check engine light stays on


Could be a number of things but start checking these things first:

1. Change your spark plugs, they're inexpensive and may solve the issue
2. Change the air filter, inexpensive and could be the issue
3. Change the oxygen sensor
4. Check the condition of the distributor and ignition coils, replace anything that looks worn or frayed. Let us know if that helps.

Nov 06, 2013 | 1994 Audi 100

1 Answer

My 1997 Audi a3 is juddering when I change gears and it's low revs


Hi Kristopher, A shudder from the manual transmission is usually caused from a defective part in the clutch assembly. It could be caused by uneven wear of the pressure plate (clutch cover) or wear on the clutch plate boss (The center of the clutch plate with the springs or rubbers which absorb the torque when releasing the pedal) A shudder can be generated from a defective engine or gear box mount, worn CV joints or spiders or a loose bell housing. Start with the last suggestion and work backwards as the clutch replacement will require the most work. If the clutch assembly has been replaced recently, and the parts available are of the same quality we receive where I am, you will need to do the job over. Regards John

Oct 07, 2012 | Audi A3 Cars & Trucks

4 Answers

2005 ford escape jerking


indicates water in harness connections or at the terminals of the ECM or other modules

Oct 24, 2017 | 2005 Ford Escape

Not finding what you are looking for?
2005 Audi A3 Logo

Related Topics:

613 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

yadayada
yadayada

Level 3 Expert

79865 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14411 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...