3.8 v6 engine number

engine # is raised numbers on engine block

Check/replace brakes if needed But, if you had those brakes replace recently, take the car back to the shop that did it and tell them what's wrong and that you demand they fix it. But, before you do al of that, check your brake fluid level.
If your brake fluid is full then you my need to bleed your brakes or replace ABS sensors on your disk brakes which isn't easy or cheap

The horn relay should be located under the hood of the car or under the dashboard. hope this helps?!



Please rate and comment - Thank You

Sounds like you need to visit a salvage yard.

Firing order diagram on 1998 Ford Mustang V6: 1 - 4 - 2 - 5 - 3 - 6 LEFT bank numbered 1 to 3, right bank numbered 4 to 6 coil Pack: 1 2 3 5 6 4



Please rate my response. Thanks!

Please don't forget to a rate! Thank you:


3.8L and 4.0L Engines Firing order: 1–4–2–5–3–6 Distributorless ignition system

1997 Ford Mustang 3.8 liter V-6 VIN "4"

Cylinder # passenger side radiator to firewall, 1-2-3
Cylinder # passenger side radiator to firewall, 4-5-6

Coil numbering
Radiator side, passenger to driver side 5-6-4
Fire wall side, passenger to driver side 1-2-3

Thank you for using fixya and good luck

Below is the diagram for your '96 Mustang with a 3.8 V6. Best of luck with your repair and please return to rate this solution. Thank you and thanks for using Fixya!
Greg

check for fuel, spark and compression. these are the only things needed for a engine to run

that trnas will not bolt up and since you don't have a computor control the trans wount interface with the harness it requires which you do not have on your vehicle. please rate this solution