Question about 1992 Dodge Dakota

1 Answer

Transfer case 4x4 wont work aside from vacume why would this happen

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

The shifting gears may be gone

Posted on Feb 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

4x4 vacum switch


On the top of the transfer case

Mar 23, 2014 | 1998 Dodge Ram 1500 4WD

1 Answer

2008 F150 5.4 XLT 4X4 No 4wd


you need check inside your transfer case for brock parts

Dec 28, 2013 | 2006 Ford F-150

1 Answer

I have a 91 s10 4x4 and the 4 wheel drive wont engauge


There is a vacuume switch with 3 vacuume lines running to it on the top side of the transfer case that is a known problem on push button 4wd. If i remember right the 91 has this and it should take care of your problem. It's called the transfer case switch and it's about $15.

Jan 28, 2013 | 1991 Chevrolet S-10

1 Answer

4wheel drive will not engage


There are three main things that could cause this. #1: in the passenger side kick panel is a module that controls the 4x4 and it should be clicking as you try to put it in 4x4.#2:There is a vacume activator switch on the transfer case located on the top on the drivers side.(If the module is clicking and trying to put it in 4x4 then I would just go to this activator switch).#3 If you replace the switch and it still dosn't go in to 4x4 there is a vacum diaphram under the battery tray that pulls the front end into 4x4.Check and make sure that there is vacum getting to the diaphram which is controled by the activator on the transfer case.If no vacume at the activator or diaphram check all the vacume hoses going into and out of the activator.If no vacume while vehicle is running suspect bad vacume line.You will need to remove the battery to test the diaphram under the battery tray.You will need to hook up some kind of battery to the cables with the battery out of the car to get it started in order to check for vacume at the diaphram.

Feb 06, 2010 | 2000 Chevrolet Blazer

2 Answers

4 wheel drive hi wont work but 2 wheel and 4 wheel drive lo will in my 03 blazer


first you need to figure out if 4 wheel drive in 4 low is working. i know you said it is but do the front tires actually pull... if it is than you have a transfer case issue... if it does not than you probably have a vacum issue with the front hubs

Jan 30, 2010 | 2003 Chevrolet Blazer

2 Answers

I have a 1996 Dodge Ram 1500 quad cab 4x4. I have been in Iraq for 15 months, and now that I'm back I went out to test the truck out. when trying to switch into 4 high, nothing happens, no "jump",...


Most likly cause to your problem would be the transfer case vacume switch check for vacume at switch then check for vacume at the front differntal if you have vacume at switch but none at the front differntal then replace transfer case vacume switch if no vacume at switch look for broken vacume line at intake manifold

Sep 17, 2009 | 1996 Dodge Ram 1500 Club Cab

1 Answer

My truck transfer case wont come out of 4 wheel drive


Is it auto push button. If so there are more probles could be than just one.(push button) blown fuse, now power to the switch, no power to the vacume accuator or vacume. mabe differnt size tireds, but chances are good that its a vacume proble,

Mar 28, 2009 | 1998 GMC Sierra

2 Answers

95 dodge 1500 4x4 wont engage but transfer case is go in gear?


There is a vacuum switch on top of the transfer case that gets stuck check that. It redirects vacuum to the vacuum actuator on the front axle when the transfer case is shifted into 4x4.

Mar 21, 2009 | 1995 Dodge Ram

2 Answers

4X4 not working


under the battey compartment is a lever that runs on vacume unhook the cable from the vacume plungger u will first have to take the battery and battery compartment out once u get the cable unhooked have someone start ur truck and then pull the cable under the battery box that goes to the 4x4 unit dont pull too hard u may pass up the sweet spot that locks in to 4x4 they may have to go to reverse to drive a couple of time while u r pullin on the cable itr will click forward bout a half inch when it locks in if ur 4x4 works after this u will need to replace the vacume plunger or do like i did and pull it till it locks in and tie it off to sumthin n go wheelin.... lol

Jan 05, 2009 | 1993 Chevrolet S-10 Blazer

1 Answer

4x4 switch not working


there is a vacume operated switch on top of the transfer case replace that or check vacume lines they might have a hole in them.

Dec 07, 2008 | 2006 Chevrolet Silverado 1500 2WD

Not finding what you are looking for?
1992 Dodge Dakota Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...