Question about 1997 Honda Odyssey

1 Answer

Front end damage - 97 shuttle 2.2 ies

I need 2 airbags,2 headlights,1 hood,1 left side mirror,1sensor for airbags,1 radiator. Where can I get these parts at a reasonable price ?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 2,039 Answers

Scrap yard for import that the only way to have it cheap but be carefull here in canada its ilegal to install air bag part second end hope its not our case hope it FIXYA our problem thank you pierre

Posted on Jul 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Fuse_location for left head light toyota corolla t3 vvti


The fuse location is usually under the left knee. on new cars it is under hood near battery a black box. Look for head lights there maybe 2 fuses. 15amps Good luck.

Oct 29, 2011 | Cars & Trucks

1 Answer

Schematic to driver side fuse box


Cavity Fuse Description
1) 15 Amp Blue Horn Relay, Power Sunroof
Relay, Power Window Relay
2) 10 Amp Red Rear Fog Lights (Export Only)
3) 20 Amp Yellow Cigar Lighter
4) 10 Amp Red Headlight Low Beam Right
5) 10 Amp Red Headlight Low Beam Left
6) 20 Amp Yellow Body Control Module/Power Door Locks
7 )10 Amp Red Left Park Light/Left Tail Lamp/License Plate Lamp
8) Spare
9) 10 Amp Red Right Park Light/RightTail Lamp/License Plate Lamp/Cluster
10) Spare Cavity Fuse Description
11) 15 Amp Blue Flasher
12) 15 Amp Blue Stop Lights
13) 10 Amp Red Body Control Module/CMTC/Cluster/Pass. Airbag On,Off Indicator, Auto Daylight
Mirror/Light Bar Switch (Renegade Only)
14) 10 Amp Red PDC Fuel Pump/AC Clutch,
Starter Relay/Engine
Controller/Transmission
Controller (Diesel Only)
15) Spare
16) 20 Amp Yellow Power Outlet (Rear)
17) 15 Amp Blue Rear Wiper
18) 20 Amp Yellow Radio Choke & Relay
Cavity Fuse Description
19 20 Amp Yellow
Frt Fog Lights/Trailer Tow
Stop and Turn Lights
20 Spare
21 10 Amp Red Radio
22 20 Amp Yellow
Power Sunroof Relay/
Antenna Module (Export
Only)
23 Spare
24 10 Amp Red PDC Blower Motor
25 10 Amp Red Heated Seat Switches/HVAC
Control Head/Trailer Tow
Battery Charge
26 10 Amp Red Headlight High Beam Right
27 10 Amp Red Headlight High Beam Left
28 Spare
29 10 Amp Red Heated Mirrors/Rear Window
Defroster Indicator
Cavity Fuse Description
30 15 Amp Blue Heated Seat Module
31 Spare
32 10 Amp Red Wiper Switch/Front and
Rear Wipers
33 10 Amp Red SKIM Module/Data Link
Connector
34 15 Amp Blue Body Control Module/
Cluster/Interior Lights,
Hands Free Module/Radio/
CMTC/ITM Module & Siren
(Export Only)
35 Spare
36 10 Amp Red Airbag Control Module/
Occupation Classification
Module (Right Front Seat)
37 10 Amp Red Airbag Control Module
38 10 Amp Red ABS Controller/Shifter Assembly
39 10 Amp Red Hazard Flasher (Turn
Signals)/Backup Lamp
Switch (Manual Transmission
Only)/Transmission Range
Switch (Automatic Transmis

May 23, 2011 | 2005 Jeep Liberty

1 Answer

Can you help me change my headlight assembley? i have a 97 200sx SE


1.) Pop the hood to your Nissan. The headlight assemblies are only accessible from the engine compartment.

2.) Clear the area behind the bulb you are replacing. If you are replacing the passenger side bulb, you will need to remove the radiator overflow bottle. The bottle will unhook from its connective tube by pulling it toward the front of the car and up from the ground. If you are replacing the driver's side bulb, you may need to remove the battery. You will do this by unscrewing the positive (red) and negative (black) terminals that connect the battery to the engine, and then lifting the battery straight out of its housing.
3.) Remove the electrical connection on the back of each headlight assembly. This will be a bundle of wires with a wide plug sticking into the back of the assembly.
4.) Unlatch the plastic clip holding the headlight assembly case in place.
5.) Pry the small metal clip holding the bulb using your fingers or a screwdriver. Be careful not to bend, break or damage the clip or the bulb.
6.) Insert the replacement bulb into the headlight socket and reattach the metal clip that holds the bulb in place.
7.) Relatch the plastic clip holding the headlight assembly case in place.
8.) Reconnect the electrical connection to the back of the headlight assembly.
9.) Replace the radiator overflow bottle or the battery, depending on which bulb you replaced.

Mar 02, 2011 | 1997 Nissan 200SX

1 Answer

How to take out the radiator and ac radiator


Unfortunately you may not like the answer. The manuals cal for you to take the entire front end apart, including the bumper. I'll tell you, you will have to take the front end almost apart. Start by removing the battery, negative post first as this is necessary to the airbag sensors. Remove the battery and the tray. Next remove the electrical power distribution box and lay it aside. mark and remove the hood latch so you can line it back up on the install. Now there are several bolts to remove across the radiator shroud brace remove them and note the different lenghts so you can return them on re-installation. drain the radiator and remove the hoses top right and bottom left. If you have an automatic transmission you will need a special tool to remove the lines (found at your local parts stores). On the bottom of the vehicle you will need to have removed the protection shroud. once you have the lines and hoses disconnected you will need to remove the headlight assemblies by the bolts and not the adjustment rods. there you will find behind them a plug disconnect for your airbag sensors on the right and the left as well as two bolts on each side remaining in the shroud. remove the shroud by pulling up and to one side or the other while pulling out on the bumper at the top. after this there will be two brackets at the bottom to remove the radiator. The radiator will come out through the bottom of the car. To continue with removing the a/c radiator (condenser coil), using the same style tool for removing the transmission lines, disconnect the lines and remove it as well. Remember though to have the freon properly drained if the system is still charged as the intense pressure can cause injury when taking the lines apart. Installation is the reverse of the dis-assembly.

Jan 14, 2011 | 1989 Ford Taurus

1 Answer

Need to remove and repair headlight motor on a 1988 corvette


REMOVAL & INSTALLATION 1984–88 Vehicles
  1. Open the hood, then turn the headlights on.
  2. Detach the headlight motor wire on the outer side of the headlight.
  3. Turn the headlights off (the disconnected light should stay open).
  4. Unfasten the 4 screws at the bezel. There are 2 at the front and 2 at the sides. Fig. 1: With the hood in the raised position, unfasten the Torx® screws from the outer side of the headlight bezel/trim piece 91036p23.jpg
    Fig. 2: You must then remove the screws from the inner side of the bezel/trim piece 91036p24.jpg

  5. Remove the bezel. Fig. 3: Remove the first of the top bezel/retaining ring screws . . . 91036p25.jpg
    Fig. 4: . . . then remove the remaining Torx® screw 91036p26.jpg
    Fig. 5: Lift the bezel/trim piece away from the headlight assembly 91036p27.jpg

  6. Remove the retaining spring by carefully using a hooked end tool, such as a cotter pin removal tool to move it to the side.
  7. Remove the headlight from the aiming pins by rotating the headlight toward the center of the car.
  8. Unfasten the 4 retaining ring screws, then remove the ring. Fig. 6: With the hood closed, you can see the 4 headlight retaining ring screws (1) and 2 aiming screws (2) 91036p28.jpg
    Fig. 7: Remove ONLY the 4 retaining ring screws, do NOT touch the aiming screws 91036p29.jpg

  9. Remove the headlight pump from the mounting bracket, unplugging the socket as you pull it away. Fig. 8: Remove the headlight away from the mounting bracket, unplugging the socket as you pull it away 91036p30.jpg
    To install:
  10. Install the headlight bulb, making sure it is plugged in properly.
  11. Position the retaining ring and secure with the 4 screws.
  12. Position the headlight into the aiming pins. Move the retaining spring back into place.
  13. Install the bezel and secure with the retainers.
  14. Turn the headlights on, then connect the headlight motor wire.
  15. Turn the headlights off. Both should lower.
  16. Close the hood. Check the aim of the headlights, and adjust if necessary.
1989–96 Vehicles
  1. Open the hood.
  2. Open the headlight door halfway. This can be done either by turning the headlight switch on, then back to the parking lamp on position, or by the manual headlamp control knob (which is located on the inboard side of the headlight door). NOTE: Before removing the screws from the side of the headlight bezel, place your hand under the bezel to support and prevent damage to it.
  3. Remove the screws from the front of the headlight bezel. NOTE: Before removing the screws from the side of the headlight bezel, place your hand under the bezel to support and prevent damage to it.
  4. Remove the Phillips head screws from each side of the headlight bezel.
  5. Remove the bezel by pulling it straight out from the engine side of the hood. Fig. 9: View of the headlight bezel mounting 91036g28.gif

  6. Unfasten the screws from the headlight retaining ring.
  7. Remove the headlamp from the assembly, unplugging the electrical connector as you are pulling it away. Fig. 10: Exploded view of the headlight assembly 91036g29.gif
    Fig. 11: Location of the headlight mounting and aiming screws 91036g30.gif
    To install:
  8. Attach the headlight electrical connector.
  9. Position the retaining ring and install the screws securing the ring to the headlight.
  10. Position the bezel in place on the headlight assembly.
  11. Install the screws on each side of the bezel and tighten to 51 inch lbs. (5.8 Nm).
  12. Install the screws on the front of the bezel and tighten to 17 inch lbs. (1.9 Nm).
  13. Cycle the headlamps, then close the hood. Check the headlight aim, and adjust if necessary.
prev.gif next.gif

Jul 07, 2010 | 1988 Chevrolet Corvette

1 Answer

Broken headlamp lense on 2000 Dodge Caravan


1. Disconnect the Battery and wait at least 2-minutes, inorder for Airbag Sensors to disengage.
2. Open the hood.
3. Remove the bulb: Turn the retaining ring (with ridges) counterclockwise approximately 1/8 to 1/4 turn. Pull the bulb out using the base of the bulb and not the wires.
4. Remove the bolt holding the Headlight Assembly to the Radiator Support Panel.
5. Remove the bolt on-top of the Headling Assembly.
6. Pull the Headlight Assembly out the front.
7. Disconnect any remaining electrical connections.
Let me know if this helped, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!

Feb 03, 2010 | 2000 Dodge Caravan

3 Answers

I lost my manual for 97 mountaneer fusebox diagram


1. pwr antenna 7.5 amp 2. high mount stop lamp 7.5amp 3. lights 15 amp 4. left headlight 10 amps 5. data link connector 10 amps 6. airbag, blower motor relay 7.5 amps 7. lamp dimmer 7.5 amps 8. RH headlight, daytime running lts, fogs 10amps 9. autolamps, memory seat 10amps 10. blend door ( heater), shift lock actuator, cruise control, brake press limit, console, integrated contol panel, rear blower relay 7.5amp 11. radio, dimmer relay, inst cluster, autolamps 2 7.5 amp 12. liftgate wiper washer, front washer relay 10amps 13. brake on off switch 15 amps 14. antilock brakes 10amps 15. airbag diagnostic 7.5 amps 16. wiper main 30amps 17. cig lighter 25 amps 18. heater-a/c eatc module 15 amps 19. radio noise cap, ign coil, PCM power diode 25 amps 20. radio, powr ant 7.5 amps 21. turn /hazards 15 amps 22. turn hazards 10 amps 23. rear wiper relay, 10 amps 24. anti theft 10 amps 25. cluster 7.5 amps 26. rear window defrost, overdrive trans, backup lamps 10 amps 27. interior lighting 10 amps 28. GEM, mem seat 2 , 7.5 amp 29. radio CD changer 10amps 30. not used 31. rear blower relay, RH heated mirror, 7.5 amp 32. heated rear window switch RH heated mirror 7.5 amp 33. DRL module, RH LH daytime running lamp 15 amp 34. power antenna module, remote chassis unit 7.5 35. not used 36. not used

Jan 07, 2010 | 1997 Mercury Mountaineer

2 Answers

How do i get to the blinker bulb on the 97 olds 88ls in the fron?


To change the blinker or headlight bulb on an 1997 Oldsmobile 88: Open the hood, remove the plastic cover thing so that you can see the housing for the light. On the back side of the housing there are three clips, remove those (I was able to remove them with just my fingers). Once the clips are removed the whole headlight slides out the front of the car. Now you can easily replace any of the blown bulbs.

Jul 26, 2009 | 1997 Oldsmobile 88

1 Answer

I need help on replacing a radiator on my 2000 chevy cavalier


Disconnect negative battery cable. If you have Delco Loc or Theftlock audio system, turn off feature which reqiers disconnecting the battery. Make sure engine is cool and turn cap slowly to release pressure. Drain cooling system. Disable airbag system by disconnecting the electrical connector from the airbag system's forward discriminating sensor located on the hood latch support bracket. Remove the cooling fan and shroud assembly. Next loosen clamps for upper and lower hoses then Disconect from radiator. Disconect the coolant reservoir inlet and outlet hoses from radiator. You will need a couple drain pans and rags. If your car has an automatic transaxle, Disconect it from the left side tank of the radiator. Use a back-up wrench on each welded nut while loosening the cooler fitting. Be careful not to bend or brake any lines when loosening the fittings. If they are tight spry some WD-40 and wait about 10 mins. Plug the ends of the disconected lines to prevent leakage. Remove right and left head lamp assembiles. Remove hood latch support brakets from radiator crossmember. Remove condenser mounting bolts. Remove the radiator upper mounting bolts located at the upper left and right ends of radiator's side tanks. Now carefully remove radiator. To install just follow directions backwards. I hope this helped.

May 08, 2009 | 2000 Chevrolet Cavalier

1 Answer

Find front airbag sensor 2003 Sierra


The front crash sensor is on or near the radiator support under the hood, it is a little square box, one question why do you think it has a problem? it is a mechanical device, a steel ball bearing sitting in an inverted cone, when you crash the ball bearing breaks free of the magnet, that breaks a connection and signals the airbag monitor to fire the airbags, it takes a 5+ MPH impact to set all this in motion, there are side impact sensors as well, the physics of these are a little different, they are measured in G force of the impact, hope all this doesn't bore, one note the fuel that fires the air bag is made by the same folks that make rocket fuel for the solid fuel boosters of the space shuttle.

Oct 15, 2008 | 2003 GMC Sierra 1500

Not finding what you are looking for?
1997 Honda Odyssey Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...