Question about 1996 Jeep Grand Cherokee

1 Answer

Decoding my radio

By mistake i used a wrong code after changing my battery, and the screen says please wait for 2 hrs but i have waited for days now

Posted by on

  • jeep123 Jul 01, 2008

    radio in jeep 1996 says wait 2 hrs, wot can ido? have code but wont allow me to input it.

×

1 Answer

Replace it,its useless to repair?

Posted on Oct 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

My radio /cd player won't allow me to put the code in


If the wrong code has been entered too many times the radio is likely to be permanently blocked.

Each time a code is entered wrongly or the wrong code is used there will be a waiting time before the code can be tried again and each time that waiting time will be longer; up to several hours.

It is important to enter the code and activate the radio precisely so check the procedure in the manual before starting then if the code won't go in assume you have the wrong code.
The correct code can be purchased from the dealer or various internet sites offer "find your code" services. Alternatively it is possible to have the radio re-coded or decoded. Bear in mind the radio could be permanently blocked and effectively useless..

Jan 24, 2016 | Cars & Trucks

1 Answer

Radio not working golf gti mark 4


If factory installed put on radio.The safe sign will appear.There should be a 4 digit code for the radio.Punchin the code using numbers 1-4.Press repeatedly from number 1 till for the fist digit number 2 for the second digit etc.when you have punched the code in the safe sign will appear.Briefly press loud /expert then wait a few seconds your radiio should then display .Look for your favourite channels .If you punch in the code wrong there is a waiting period.First attempt wait 21 seconds ,second attempt1.5 minutes 3rd attempt5.5 minutes...4th attempt22 mins.5th attempt1.5 hrs. If this fails ,disconnect battery and start again

Aug 11, 2014 | 2000 Volkswagen Golf

1 Answer

97 S90 Volvo with original radio per Previous owner. Radio worked before Battery replaced. Called dealer and Got code, put it in and got rpt message. Several attempts- still no Working radio! HELP...


ok rpt stands for repeat. when it says that it is the wrong code that you are putting in. you only get three trys on this. after the third time it will say off. you must wait 2 hrs with the stereo on until you can try putting a code in. you need to find the right code for that stereo.inside your manual book there should be a credit card size card that has a four digit code on it. that is your stereo code. put that in and your stereo should be up in running. good luck

Dec 07, 2013 | Cars & Trucks

1 Answer

What is the stereo code for a BMW 325i '94? someone help plzzzz


pull the radio, write down the serial #, call BMW and it will be a 4 digit code.

Dont enter the wrong one....you will then have to wait 1.5 hrs with the key on ACC and radio hooked up for the wrong code to clear to be able to enter in the correct code.

They figure radio thieves just dont have 1.5 hrs to hang around.

Nov 10, 2009 | 1994 BMW 3 Series

2 Answers

Need to reset the radio. It says wait.


You need to recover the radio's serial number to decode the 4 digit radar key. The full process and decoder is available here: Porsche Boxster: Online Lost Radio Code Recovery Tool

Apr 26, 2009 | 1999 Porsche Boxster

1 Answer

I have entered incorrect radio code for my 01' ML320 Radio and it is know stuck in WAIT. How can I reset radio and re enter Correct code Thanks


leave the radio on for a few days, with the wait displaying, it will display CODE after a few days, 2 - 3 days, then enter the correct code , everytime u enter a wrong code the time increases.

Mar 01, 2009 | 2007 Mercedes-Benz ML320 CDI

2 Answers

Porsche radio code


The dealership it has been serviced at can usually refer you to an advisor who can give you the code for your radio. Our son had the same problem

Oct 26, 2008 | 2000 Porsche Boxster

1 Answer

Decode my radio


Yes that's right, It might be heard for you bring it out the radio. I heard the same problem for about 2-4 days after I purchased my Ford Mondeo.
I opened the car drower next to the drivers seat and looked up inside it. behold I found the serial no and the key code. Before then I already tried so many codes such as 1111, 9022 for every wrong code you will need to wait another 30minutes after which I tried   1234 then It changed from "wait 30minutes" to "TEN"

I continually pressed and robb the upper layer keys it brough back the code option which I now entered the real code. and right away my radio was unlocked.

Hahahahah.

Try searching your car all around I might be hiden somewhere.
Remember the car is yours.

Good Luck

Aug 07, 2008 | 1999 Ford Contour

Not finding what you are looking for?
1996 Jeep Grand Cherokee Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...