I have a 92 buick skylark 3.3. v6 that I just replaced the starter on after the original starter gave out...after 3 days it's acting like the starter is junk already...I need to know if there's an inline diode or fuse or something other than the celanoid going bad that could cause this. Please...any answer would be greatly appreciated. Thank You, Sam
Re: I have a 92 buick skylark 3.3. v6 that I just...
MAKE SURE ALL CONNECTORS TO THE STARTER ARE TORQUED TO THE PROPER SPECIFICATIONS IF THEY ARE CHECK RING GEAR ON TORQUE CONVERTER> MAY HAVE MISSING TEETH ON RING GEAR!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You have 2 issues here #1 the engine is running hot . Test the cooling system fans they seem to be not working. #2 car dies i would start with testing the secondary ignition (spark).
Can you turn the engine by turning the alternator or water pump ? If the engine turns freely, could be a problem with the cables to the starter or the starter itself.
that must not be original motor maybe. I'm sure there can only be two or three diff motors. take old one in with you and pull all avail starters for that car and match it up.
2.0L 4cyl
3.0L 6cyl
3.1L 6cyl
3.3L 6cyl
×