Question about 2000 Chrysler Concorde

1 Answer

Automatic Shifting Lever difficulties

Approximately four months ago I had a mechanic overhaul the motor on my 2000 Chrysler Concorde. After picking up the car I noticed that shifting the automatic lever in/out of gear seemed difficult. I took the car back to the mechanic and he stated that the shifting cable has probably became scarred or dry inside the cable itself and just needed to be replaced. The cable is about $90.00 and I am mechanically inclined only a small amount but was wondering how difficult the cable was to replace and what repair manual would explain the process the best.
Thanks in advance

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Don't do it yourself. You would have to have the car on a hoist to do the work, as so much of what has to be done is out of sight and out of reach even if you were to jack up the car on stands. I had the shifter cable changed on my 1998 Intrepid ES, which had never seen snow or ice (I'm from Ontario), as all winters were spent in Florida. Besides changing the cable, the interlock has to be adjusted, and without the proper instruction, you would have nothing but problems, and probably would not be able to turn your key in the ignition switch. The total cost (at the dealer) for parts and labour cost me $286.16 U.S. tx. incl.The only good manual to explain even part of the procedure is the Chrysler shop manual ($96.00 ). Get the cable changed before it seizes up altogether, or you break the shifter lever etc. trying to force it. Hope this helps you. Regards Al Waters

Posted on Jul 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2000 Concorde turn signals don't work


Do your flashers work? If not it may be the flasher unit is bad. It is located under the dash on the drivers side on or near the fuse box. If the flashers work you may have a problem with the turn signal lever or the wiring connected to it.

Sep 11, 2012 | 2000 Chrysler Concorde

1 Answer

My 1993 chrysler concorde transmission will not shift into overdrive, had another transmission placed, has same prob, what could be causing it?


For Automatic transmission problem,click the link below:---- Automatic transmission troubleshooting:----

http://howtobyme.blogspot.com/2011/11/automatic-transmission-will-not-go-into.html

---------
Automatic transmission shift lever issues?-------

http://technoanswers.blogspot.com/2012/01/automatic-transmission-shift-lever-hard.html

-----------
AUTOMATIC TRANSMISSION FLUID LEVEL? --

http://schematicsdiagram.blogspot.com/2011/07/how-to-check-automatic-transmission.html

--------------

AUTOMATIC TRANSMISSION FLUID AND FILTER?

http://schematicsdiagram.blogspot.com/2011/07/how-to-change-automatic-transmission.html

-----------
Transmission fault light on car dash?

http://schematicsdiagram.blogspot.com/2011/12/transmission-fault-light-on-car-dash.html

--------
Transmission shifting problem?

http://schematicsdiagram.blogspot.com/2012/01/transmission-shifting-problem-on-toyota.html

--------
Transmission Slips out of 2nd gear?

http://repairhelpcenter.blogspot.in/2012/02/transmission-slips-out-of-2nd-gear.html

-----------
OD light flashing and transmission fluid leaking?

http://repairhelpcenter.blogspot.in/2012/02/od-light-flashing-and-transmission.html

----------
Why Transmission fluid leaks near radiator?

http://repairhelpcenter.blogspot.in/2012/02/transmission-fluid-leaks-near-radiator.html

----------
Transmission fluid leaking?

http://technoanswers.blogspot.in/2012/02/ford-windstar-transmission-fluid.html

-------------
****** wont go in reverse?

http://technoanswers.blogspot.in/2012/02/dodge-neon-wont-go-in-reverse.html

-------------
Automatic transmission will not go into reverse?

http://technoanswers.blogspot.in/2012/02/dodge-automatic-transmission-will-not.html

----------
Transmission is making buzzing noise?

http://technoanswers.blogspot.in/2012/02/transmission-is-making-buzzing-noise.html

-----------

This will help.

Thanks.

Feb 07, 2012 | 1993 Chrysler Concorde

1 Answer

Transmission is apparently locked in 3rd gear. Gear shifter will not move.


unhook lincage at tranny and try shifting it unhocked if it shifts it inthe linckage someware cable or shift lever most likley linckage if it dont move at tranny its in the tranny

Apr 04, 2011 | 2000 Chrysler Concorde

1 Answer

Have a 2000 Chrysler Concorde 2.7L engine need to know how to ID the #3 ignition coil


I'd suggest picking up a Chilton's Manual,for your
particular vehicle. They can be found at any parts store,and have a wealth of knowledge.

Apr 01, 2010 | 2000 Chrysler Concorde

1 Answer

Chrysler concorde sun roof stuck open!!


Check the fuses to start with. If they are fine it could be a broken switch or a burnt electrical motor. If the closing mechanism has broken and bound up it could keep the window from closing. With the car in accessory mode or ON -whichever allows the windows to open - hit the close switch and listen closely. if a click of the motor can be heard it is a mechanical issue - if not it is electrical.

Feb 26, 2009 | 1998 Chrysler Concorde

Not finding what you are looking for?
2000 Chrysler Concorde Logo

243 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...